• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.

    Why Join?

    • Exclusive Access: Gain entry to private forums.
    • Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
    • Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

Search results

shop deals on amazon
kirk engines
Advertise with us
cub cadet used parts
IH Cub Cadet Forum

Help Support IH Cub Cadet Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    Please help

    David i sent you a message on you engine noise .Hydro Harry ask me if i would .David
  2. D

    Archive through April 23, 2013

    Doug,if the 169 gets in your way ,all come get it .David Seattle
  3. D

    Archive through March 16, 2013

    Harry,you need brake material,i can get ,any thing you want,and close by my house,
  4. D

    Can a cast metal front axel be welded to repair it?

    as Charlie said ,not enough info ,and if its cast iron ,yes it can be done ,with a buzz box .using [ni rod] thats for cast iron ,there is other rod as well ,but if you take it to a weld shop .i would say over $100.00 .just look for a used one .
  5. D

    John deere 210

    James ,be sure to clean the filter in the tank .and i would replace the fuel hose as well .
  6. D

    Archive through March 01, 2013

    Donald.the ACR holds the exhaust open till the engine sees 600 rpm ,the tab on the ACR holds the valve from .030 too .043 .and it is adjustable ,i went through this on my cubs ,using a dial .now one more thing,the spring ,on the ACR may be weak ,and you would get a bad reading ,not letting the...
  7. D

    Archive through February 18, 2013

    Mark G ,you may have went too far ,the c/r will stay open from .030 to .043 till you reach 600 rpm.if you roll the engine real slow with the valve cover off ,you know that already .you should see the exhust valve close ,then do your feeler thing ..017to .019.hope this helps
  8. D

    Archive through February 18, 2013

    Hydro Harry ,thank you for the kind words.i try
  9. D

    Archive through February 18, 2013

    Jonathan ,i sent you some info.
  10. D

    Archive through February 17, 2013

    Jonathan ,i make my own shims ouit out of stainless steel,because i fit my cams ,and machine the thrust faces,because they are not true ,and lap the thrust faces of the inside of the block ,as they are not true either ,so this is why i make my own shims .as far as the bronze goes ,i have had no...
  11. D

    Archive through February 17, 2013

    Jonathan ,first you need too know how much end play you have with out,the shim .once you know that ,you need from .005 to .010 clearance .and i make my rod from bronze ,hope this helps .
  12. D

    70 127 clean-up

    Edward ,this cub turned out ,better than new .David
  13. D

    Archive through December 19, 2012

    Daniel c May when you said the gap was only .012 to .015 .how did you check this ? the only way ,is remove the rings from the piston ,and place them in the bore about a 1.000 down ,using the piston too keep them stright ,in the bore ,then use a feeler ,you may have alot of blow by ,do you have...
  14. D

    Abnormal Drive-line Wear

    Jeremiah i may be able to help you ,all send you a note .David
  15. D

    Broken Tap Removal

    Ryan ,first never use oil or greese in cast iron ,you may be able to rent a tap extractor ,or take it to a machine shop ,the block cost too much to mess with ,good luck .David
  16. D

    Tom R's 100

    i buy my tires from tucker tire ,tucker tire.com
  17. D

    Archive through June 27, 2012

    Donald ,yes you can still buy the steel gears ,pullingtractor .com sales them ,.i was lucky i found them on three of the cubs i had
  18. D

    Cadet 55 help

    Bill you may want to go to a colbult drill ,in drilling some things ,speed is a bad thing ,so slow and lots of pressure .hope this helps .David
  19. D

    70 127 clean-up

    Ed i wish i had made one like yours years ago ,cleaning parts is the pits .David
  20. D

    Kohler k241 with a walbro 52 carb

    MARK get rid of the walbro ,and get a #26 carter
Back
Top