Archive through April 17, 2010

[tbenak]

Myron, thanks for the advice on the mower spindles. I have not dealt with that set-up yet.

 

[tbenak]

Myron, I dismantled and inspected the spindles as you suggested and you were exactly right. The domed mounting plates are worn and the ST-745's are in great shape! I wonder if there is a way to repair the mounting plates.

 

[mbounds]

Thomas B: I think you will have to reassemble the assembles, one at a time, (not the blades of course) and physically determine where the slop is coming from.... Sometimes the domes get pushed outward and a good mechanics hammer on an anvil can fix that. If the spindle holes are enlarged then a machine shop could fix that...

Myron B

 

[cjames]

Hello I am looking for a NF spring assist, my email is [email protected]

Thanks,
Conner

 

[rgoodrich]

wanted creeper drive for 1200 with drive shaft and gear shift cover

 

[jclendenen]

Hello,

Looking for a rotor assembly for a cub cadet 105 hydrostatic pump. Mainly, I need the sprocket and the pin that goes in the engine shaft. Attached is a breakdown of the transmission, see part #4:

Please send me an e-mail at [email protected]

Regards,
Joe

 

[lhinds]

I need 3 standard keepers and locking wedges for a brinly cultivator. Thanks.
Luther
[email protected]

 

[shale]

I'm buying a 1A tiller and need a gearbox. If you have an extra, let me know. Email me at [email protected] or call/txt at 270-293-4000.

Thanks,

Stuart

 

[mschuermann]

Looking for a driveshaft for a hydro Quietline.

 

[rdehli]

lo9oking for a good 82 series steering wheel