Robert bray
Member
Back at my 122. I recently got to work on the mower deck and pulled the left and right spindles. the bolts were rotted so they had to be cut. the bottom blade bolt was already cut and seemed to have been welded on previously. The top nut with grease nipple came off easily but i am not sure how the bearing comes out. the other spindle grease nut looks welded on. I know what parts i'll need mostly, like new mounting screws (6 of them), cutt off the already cut blade mount and weld a new one in ect. I want to know how to get the bearing out so i can rebuild them and if it is worth rebuiling. They seem to have been modified alot and not sure if its worth the effort on these. Would you replace them with modern spindles and modify the deck or rebuild them?
Attachments
-
IMG_20240529_140230.jpg358.7 KB · Views: 12
-
IMG_20240529_140229.jpg361.7 KB · Views: 0
-
IMG_20240529_140158.jpg715.3 KB · Views: 0
-
IMG_20240529_140204.jpg431.5 KB · Views: 0
-
IMG_20240529_140208.jpg694.4 KB · Views: 0
-
IMG_20240529_140152.jpg655.7 KB · Views: 0
-
IMG_20240529_140147.jpg686.6 KB · Views: 0