Which deck is this.

[jpeabody]

Good morning gentlemen. I have a deck with the following tag on it, 0320018U11 211, and am trying to figure out the model so I can get a new belt for it. Any help is greatly appreciated.

 

[digger]

Good morning gentlemen. I have a deck with the following tag on it, 0320018U11 211, and am trying to figure out the model so I can get a new belt for it. Any help is greatly appreciated.

Measure the center pulley on the deck, that will dictate what PTO to Deck belt you need.

 

[jpeabody]

That’s great info. Thanks. Does that mean that the blades belt on a 5” center pulley would be the 954-3005?

 

[1811Cub]

You have either a 44A or 50A deck if center deck pulley and PTO are correct for a Quietline. The later 82 series and Cyclops Cubs used a 44C or 50C deck. The main difference is the size of the PTO to deck belt pitch. "A" decks use 3/8" belts. "C" decks use a larger 1/2" belt.

For the deck belt, if you have a 44" deck 954-3004 is the one you'll need. The 50" deck uses the 954-3005.

 

[digger]

That’s great info. Thanks. Does that mean that the blades belt on a 5” center pulley would be the 954-3005?

Yep

 

[-CӞ]

And 44” vs. 50” can be confirmed by measuring across the widest point of the blades’ outer arc, right?
(vs. the “OD” with of the deck itself)

 

[-CӞ]

that, and we can reasonably eliminate the possibility of cedar, treated SYP, and composite.

 

[jpeabody]

Thanks a lot y’all.