Monkeying around in Shultzie's garage

[kshultz]

Shultzie, somewhere on front cover is a series of numbers.top or side.Under "code" the first 2 numbers will tell you the yr it was built.This only works on B/S..

Hey, I found the number. It's a 1969. Thanks.

 

[kshultz]

Using the old #2 cart for what it was advertised for.

I can't seem to find the full page from where this picture came from.

 

[kshultz]

Just being a proud Dad. Jackson received a "letter" in football this year.

 

[tkhoffman]

Using the old #2 cart for what it was advertised for.
View attachment 158212
View attachment 158213
I can't seem to find the full page from where this picture came from.

Shoes, slacks and weekend sweater. I remember those days.
No full grown man owned Sneakers/ tennis shoes

 

[kmcconaughey]

The #2 cart photo is from the 1974 Parts and Accessory SDE (Special Duty Equipment) Brochure. Here's the color section, the rest is the typical after market equipment like reel mowers, lawn rollers, sickle mowers, Brinly plows and cultivators, fertilizer spreaders and so on:

 

[jack casey]

The #2 cart photo is from the 1974 Parts and Accessory SDE (Special Duty Equipment) Brochure. Here's the color section, the rest is the typical after market equipment like reel mowers, lawn rollers, sickle mowers, Brinly plows and cultivators, fertilizer spreaders and so on:

View attachment 158271

View attachment 158272

View attachment 158270

View attachment 158273

View attachment 158274

View attachment 158275

The #2 cart photo is from the 1974 Parts and Accessory SDE (Special Duty Equipment) Brochure. Here's the color section, the rest is the typical after market equipment like reel mowers, lawn rollers, sickle mowers, Brinly plows and cultivators, fertilizer spreaders and so on:

View attachment 158271

View attachment 158272

View attachment 158270

View attachment 158273

View attachment 158274

View attachment 158275

In photo F above, Shredder, Grinder....that's an IH advert....the guy is not wearing protective glasses. Very careless.
Jack

 

[tkhoffman]

In photo F above, Shredder, Grinder....that's an IH advert....the guy is not wearing protective glasses. Very careless.
Jack

Ha ha long before this country went overkill on safety. Steel tip shoes, chaps, leather gloves, ear protection, eye protection, hard hat and Work partner. NOW you are geared up to snap those two twigs and put them in the garbage.

 

[Red_108_puller]

Here's more on the engine stand.
View attachment 149280
View attachment 149281
View attachment 149282
View attachment 149283

That engine stand looks very handy, what are the measurements so I can make it for my dad and I in our garage?

 

[mgonitzke]

Ha ha long before this country went overkill on safety. Steel tip shoes, chaps, leather gloves, ear protection, eye protection, hard hat and Work partner. NOW you are geared up to snap those two twigs and put them in the garbage.

Just curious...have you ever used one of these? I have a Mighty Mac chipper/shredder, made by the same company that made the 59M for IH. It is one of the most dangerous things I own. It has no safety devices whatsoever. Twigs get grabbed by the hammers and are pulled in instantly. Debris comes flying out of the input side at warp speed the entire time you are feeding material into it. After finishing a job there is debris in a 10' radius all around the machine. Only an idiot would operate one of these without safety glasses. The 'chipper' part, which the IH units don't have, tends to self feed when the blade is sharp, and it will rapidly shift and rotate branches as you feed them. If you aren't wearing gloves and tight fitting sleeves, your hands and arms are shredded after a couple hours of use.

 

[tkhoffman]

Just curious...have you ever used one of these? I have a Mighty Mac chipper/shredder, made by the same company that made the 59M for IH. It is one of the most dangerous things I own. It has no safety devices whatsoever. Twigs get grabbed by the hammers and are pulled in instantly. Debris comes flying out of the input side at warp speed the entire time you are feeding material into it. After finishing a job there is debris in a 10' radius all around the machine. Only an idiot would operate one of these without safety glasses. The 'chipper' part, which the IH units don't have, tends to self feed when the blade is sharp, and it will rapidly shift and rotate branches as you feed them. If you aren't wearing gloves and tight fitting sleeves, your hands and arms are shredded after a couple hours of use.

You're talking commin and sense protection. Im talking about the stupidity warning labels. To gear up for your Chipper just to use a pair of scissors