Hydrostatic cub 105

[kclift]

No movement forward or backward. New hytran and filter. Got to looking under neath and found the, Centering Cam Actuating Rod Assy. had broke loose from the Brake Pedal Assy.
Is that my problem?
The Clevis rod end is intact but saw that the tab on the brake end has a chunk missing that the clevis would attaches to. What's your thoughts?
Thanks
Ken
The rod is pulled up out of the way with a wire tie.

 

[kclift]

This is a Cub 105

 

[mgwin]

Harry will be along shortly.

 

[kclift]

More ppictures

 

[kclift]

One more

 

[dschwandt]

This should give everyone a better understanding of what you are up against here.
Which part here seems to be the issue?

 

[kclift]

32 clevis is intact. If you tap the pictures above there is a connection on the brake rod that has broken.

 

[lpalma]

Oh, looks like a project to replace that part. Can you weld?

 

[kclift]

32 clevis is intact. If you tap the pictures above there is a connection on the brake rod that has broken end. Could that be repaired by shaping it up with a weld than redill the hole?

Thanks

 

[lpalma]

welderup!

 

[kclift]

That looked liked the easiest way to do without major tear down. Could this be the reason for no forward or reverse movements?

 

[lpalma]

I think you have another issue also, that is for the brake pedal to return the hydro to neutral. Does the go go handle move in either direction?

 

[kclift]

No
As I understand this lever puts the handel back to netural.

 

[lpalma]

That is why it won't move, fix it and be happy.

 

[kclift]

That was my
Thanks
Ken

 

[dschwandt]

That was one Rube Goldberg setup for sure!!
Once that whole riggamorral gets wet and rusty, it's good night Irene!!

 

[kclift]

Now can't get release level to engage in the up position.

 

[kclift]

Another problem to solve

 

[lpalma]

it is released in that position, does it still roll?

 

[kclift]

Yes