Archive through September 30, 2009

[dross]

Kraig those two holes behind where the frankenstien bolts would go are for the chute adjustment rod holder, I think on a CW blower.

 

[kmcconaughey]

Dave, you are correct. The Original also used two holes in that location to mount the mower deck AND the the BB36 snowthrower (as well as the chute rotator bracket).

 

[rdehli]

does anyone have a current email address for Rudy Oblak TIA

 

[sstanton]

I just got home from work and the other Cub dealer! I picked up another belt which will go on the 123 after I pick my daughter up from school and let you know how it works out. As far as the carb goes, I talked with my grandad and he was pretty darn sure I have the float adjusted wrong. He told me where I went wrong and how to fix it, so that will get done after I fart around with the belt.

Kraig, I didnt get to see those pics. For some reason they didnt load up.

And a big "Thank-ya" to all you guys!

 

[kmcconaughey]

Scott, you must be using Mozilla Firefox... I'll rename the images then they should at least show up as an easier to spot name, rather then the 1 or 2 that I usually name them. If you see the name you can right click on the image name and select "view image"

 

[sstanton]

Kraig, using IE, now they are showing up! I didnt know about the right click thing and that works too! Cool beans!

 

[bjrainey]

Can anyone tell me whether or not my WF 42" blade will work on a CCC 1812?
TIA Brad

 

[kmcconaughey]

Brad, I believe it should mount right up. The only issue I can think of would be the bracket that is bolted to the blade subframe for the lift rod, it may not be long enough, as in it may not stick out to the right far enough for the lift rod to clear the side panels.

 

[bjrainey]

Thanks Kraig,
We will try it and see.
My neighbor owns the 1812 and needs to move some dirt around. I told him if it would fit, he could use my blade.
After all, he is a pretty good neighbor...He gave me my 1450.
Brad