• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.

    Why Join?

    • Exclusive Access: Gain entry to private forums.
    • Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
    • Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

Archive through September 04, 2011

cadet connection
kirk engines
cub cadet used parts
Shop deals on ebay
IH Cub Cadet Forum

Help Support IH Cub Cadet Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
S

scaranci

Active member
Joined
Dec 24, 2007
Messages
41
displayname
stephen caranci
WANTED: Voltage regulator,15 amp stator.1974 K301, spec # 47421d,part # 4140306,superseded to 2540322. I am using the 301 to power a generator as it's the only power I have now and I am broke.I have a batt charger plugged in to keep it running. You guys don't need the details but dire straits here. If anyone near S.W.Mass has one for extremely cheap I'll hitchhike/walk to pick it up.Ph# 413-329-1635,6AM-8PM. I'm only online when the gen is running so the phone is the best way.
 
Looking for a servicable Kohler or Carter carb for my 1250. The K301 has been "Kirkized" with a milled head, ported block and 18Hp cam. I'm getting tired of readjusting the Walbro replacement carb, would like my Cub to start and run reliably again [so the Mrs. can cut the lawn too ;)].
 
Looking for air duct for 301 ASQ,
part #KH-47-755-33 maybe the rest of the front duct work if reasonably priced.
 
im looking for the detent clip for a narrow frame creeper gear. in case my wording isnt correct im looking for the piece that goes on the shifter that holds it into gear. email me at [email protected] thanks
 
anybody have a set of quietline headlights with screen thanks
 
I need a 3 finger clutch engagement plate for an "86" with a 7hp kohler. Also need a good PTO clutch for a "104" with a 10 hp kohler.
 
WANTED:
I.H. padlock with key!
[email protected]

230169.jpg
 
Anybody in NY, NJ, Conn., or PA looking to sell a Cub Cadet 73 please send an email to [email protected]. I would enjoy a winter project and hope you can help. Just got all my miscellaneous needed items for my 107 from Chris at Cub Cadet Classics and I am going to need a reason to stay in the barn. Thanks Chris and Thanks to whoever can help with the next toy. Bobby
 
Wanted: Brinly 3 point hitch plow. Any condition is fine, from rusty to nice. Let me know what you have. I can be contacted by e-mail at [email protected] or at 515-402-7707.
 
Searching for a good 82 series or QL runner to mow with. Not looking for a show piece, just a good working unit. Doesnt necessarily need to be in KY, I travel a bunch so I can pick up. Msg me with what you have, looking primarily for a 1250/1450 or a 582/682...would entertain a 782 also. Thanks for your time.
 
looking for a Lower 3point Bracket and a Brinly adapter for my 74 ih cub 128 also a hitch plate for it
 
Narrow frame mule drive with pullys. My spring side pulley bracket has worn itself a pretty large hole over the cross shaft causing the spring side pully to twist enough that the belt no longer drops straight into the pully. Anyone have a complete unit that is free of wear? The shaft is welded into the frame so replacing is a bit over my head and ability.
Thanks.
Mike at 906 788 4711 or [email protected]
 
I am looking for a good set of original tires - front and back - for my 1979 1650 Cub Cadet. Please send me an email if you think you can help ! [email protected] Thanks !!
 
I am looking for a cub cadet two stage snow blower for my 782 and 982. Must be within driving distance on northern Illinois.
 
I am in need of a couple of parts. 1st, a hydro control rod from a 1x9 series machine with good splines. 2nd, a WF tunnel cover cover with the hydro release flapper. Shipping would be to 54015. Thanks -Brian

230766.jpg
 
Want good running Cub w/mower deck and 12HP or greater engine. Hydro a plus, but all models considered. Not looking for a hangar queen but a good working tractor. I'm in east central NC , but will drive a reasonable distance for the right unit.

Thanks! Pictures appreciated.
 
looking for a wide frame subframe for a dirt/snow blade. have blade, just need a good subframe. give me a hollar if you have one to sell. thanks!
 

Latest posts

Back
Top