Archive through October 17, 2004

[pdorow]

Jim C.

Yes I noticed that and put a 1/2" bolt in to lock the pivot up.
Must be a lift valve problem, maybe a broken o ring jambed in the spool.

Is the lever operation forward=down? As it is now from parked position you pull the lift lever back just a little bit & the lift will drop with gravity, pull the lever back all the way it raises.

 

[kdunham]

Charlie-

Yeah,I don't know what happened. What I should have said was
<font size="+2">VRRROOOOOOOOOOOOMMMMMMMMM!!!!!!</font>

 

[digger]

I guess I shoulda waited around till the page loaded, LOL

 

[tschweizer]

I had one of Dan's blades on a 1650 with hyd down pressure. It waorked awesome in dirt!!!

 

[rmunday]

Never mind the belly blade, that's one nice looking 122! Is that yours Digger?

 

[digger]

Rick,
It belongs to Dan Hoefler.

 

[digger]

You know, the guy that also owns this!

 

[rmunday]

Know of him

Either way that's a fine machine. 'course the dozer kicks butt too!

 

[krandall]

Does any one know if Dan will be Participating in the Reindeer games this Saturday??? I would like to get ahold of him and can't figure out how...

 

[jlang]

Hey Digger, Should I leave my 122 home or just bring my big black buck deere???

PS, I might bring along my JD111 just for my FIL to ride around on, it's so darn'd cute, you won't believe!!! OK?

Please say yes, I'm trying to convince this ol' jd emplyee to come along!

 

[digger]

John,
You just as well bring a trailer load in case you get bored with one of them, ;-p

 

[jsimpson]

I gotta have one of Dan's belly blades to keep my road level!

 

[cdelong]

Torin, I made one last year that pins to and pushes from the rear hitch. It's 52" wide, angles fully both directions and the blade pivots side to side.
Up, down and angle are hydraulic while blade pivot is done manually. Lift and down pressure is controlled by rockshaft with arms reversed.

On my site here are some showing how its made
http://mhcable.com/~cdelong/Cub%20Hydro/
Craig

 

[sblunier]

Digger,

According to NOAA......

Monday: Periods of showers and thunderstorms. Chance of precipitation is 80%. High around 59. East wind between 13 and 16 mph.

Monday Night: Showers and thunderstorms likely. Chance of precipitation is 60%. Mostly cloudy, with a low around 50. East southeast wind between 14 and 16 mph.

Tuesday: Mostly cloudy, with a high around 66. Southeast wind 7 to 14 mph becoming west.

Tuesday Night: Partly cloudy, with a low around 52. North northwest wind around 7 mph.

Wednesday: Partly cloudy, with a high near 69.

Wednesday Night: A 30 percent chance of showers and thunderstorms. Mostly cloudy, with a low near 53.

Thursday: A chance of showers and thunderstorms. Mostly cloudy, with a high near 74.

Thursday Night: A chance of showers and thunderstorms. Mostly cloudy, with a low around 53.

Friday: A chance of showers and thunderstorms. Mostly cloudy and breezy, with a high around 67.

Friday Night: A chance of showers before 1am. Partly cloudy, with a low around 46.

Saturday: Partly cloudy, with a high near 62.


Let's hope this changes some....I hate having to make last minute calls due to the weather!!!!!!

 

[rmunday]

Will the gear drive from a 482 fit on a 782?

 

[roundy fendered cubs rule!]

Got another "Look what followed me home" story.
I went to Harold Shramm's auction today. After driving 87 miles one way, I figured I better take something home. I met Harold this spring at the Auburn, In. show. Very nice guy and very knowlegeable. Got his 100 and on the way home I found a garden tractor grave yard and picked up the push mowers. I need to go back there and do some more snooping around.

 

[sblunier]

Rick,

A 482 used the Peerless transmission......

If it were me, I'd use a 106/126/108/128/1000/1200/86/582 tranny to make the upgrade

 

[sblunier]

More Door Prize info:

44" Gator Blades

2ea. Craftsman screwdriver sets

Craftsman wrench set

Headlight kit

xx8/9 side sheets w/hour meter hole.

Thanks to all who have donated!!!!!!

PD grounds are all cleaned up and ready for action...now just pray that the weather forecast below goes better than it looks!!!!

 

[sblunier]

Paul D.

Yes, forward "down", back "up".....take off the center cover and watch the cylinder move to check for proper operation.

 

[mschwartz]

Got some work done today this ones going to be down to the wire for plow day