-
This community needs YOUR help today!
With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
We need more Supporting Members today.Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.
Why Join?
- Exclusive Access: Gain entry to private forums.
- Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
- Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!
This is your chance to make a difference. Become a Supporting Member today:
Archive through November 11, 2004
- Thread starter kmcconaughey
- Start date
Help Support IH Cub Cadet Forum:
Travis T,
I asked about the mount on this blade just the other day. Notice the Lift bracket. And Bryan said, That bracket is just like the one that was on the 42" blade that I picked up from Madson's a few years ago. He said it was off a 17xx or 18xx.
Steve B. Said,
That style subframe shows up in my 1864 literature
And I had a couple guys email me saying that they had that mount and bracket on 82 series red Cubs that came with the blade when bought new.
(Message edited by cproctor on November 12, 2004)
I asked about the mount on this blade just the other day. Notice the Lift bracket. And Bryan said, That bracket is just like the one that was on the 42" blade that I picked up from Madson's a few years ago. He said it was off a 17xx or 18xx.
Steve B. Said,
That style subframe shows up in my 1864 literature
And I had a couple guys email me saying that they had that mount and bracket on 82 series red Cubs that came with the blade when bought new.
(Message edited by cproctor on November 12, 2004)
tschweizer
Well-known member
- Joined
- Feb 16, 2000
- Messages
- 862
- displayname
- Travis Schweizer
I think those were for 82 series-on.
bmcmeen
Well-known member
- Joined
- Oct 31, 2002
- Messages
- 2,106
- displayname
- Bryan D. McMeen, Keeper of the Holy Hy-Tran
John G. -
Take a look just below the menu for this page - see where it says "<font color="ff0000">Please check the FAQ before posting your question - perhaps it has already been answered there.</font>"?
Been there for a number of years...
We have other plans for the FAQ anyway, if they ever release Discus 5, we'll have "sticky" subtopics like vBulletin forums do. Then we can "stick" the FAQ everywhere (Charlie, don't go there!)
Take a look just below the menu for this page - see where it says "<font color="ff0000">Please check the FAQ before posting your question - perhaps it has already been answered there.</font>"?
Been there for a number of years...
We have other plans for the FAQ anyway, if they ever release Discus 5, we'll have "sticky" subtopics like vBulletin forums do. Then we can "stick" the FAQ everywhere (Charlie, don't go there!)
tschweizer
Well-known member
- Joined
- Feb 16, 2000
- Messages
- 862
- displayname
- Travis Schweizer
Bryan, how about a big flashing "CLICK HERE!!"
Travis,
I saved this one for you and your guys!
I saved this one for you and your guys!
Digger -- Bryan forgot about me ! .... aw I'll email it to ya ...
That FAQ link has always been a little on the small side ... but I guess if you were the one to put it there you'd always know where it was to direct the misguided to it.
oh and Dig , your button doesn't work.
That FAQ link has always been a little on the small side ... but I guess if you were the one to put it there you'd always know where it was to direct the misguided to it.
oh and Dig , your button doesn't work.
Kraig,
Thanks for the pics of the spring assist lift assemblies. I have the CC spring assist for the 3-point on the tractor. The spring just doesn't have quite enough tension to offset the weight of the scraper blade. I was hoping to see something I could bolt on and use only when the blade was attached to the tractor. Do they make a stronger spring for the CC spring assist?
Dave
Thanks for the pics of the spring assist lift assemblies. I have the CC spring assist for the 3-point on the tractor. The spring just doesn't have quite enough tension to offset the weight of the scraper blade. I was hoping to see something I could bolt on and use only when the blade was attached to the tractor. Do they make a stronger spring for the CC spring assist?
Dave
mgallinaro
Well-known member
- Joined
- Jun 14, 2004
- Messages
- 69
- displayname
- MICHAEL J. GALLINARO
Here are a few work in progress pictures of my 582 to "2282" conversion. For those of you not familar with this tractor, it started as one of Tom Hoffman's 582 Plow Day tractors that I bought to install the left over parts and attachments from my 1200 restoration that my brother in Ocala, didn't want.
mgallinaro
Well-known member
- Joined
- Jun 14, 2004
- Messages
- 69
- displayname
- MICHAEL J. GALLINARO
*@^#!
I think i need aome help in my picture posting!
I think i need aome help in my picture posting!
MICHAEL G,
I sent you an email almost a hour ago, sigh!
Or read Item 22 in the FAQ's.
(Message edited by cproctor on November 12, 2004)
I sent you an email almost a hour ago, sigh!
Or read Item 22 in the FAQ's.
(Message edited by cproctor on November 12, 2004)
jmacdonald
Well-known member
Obscure humor:
pic
Ce n'est pas une pompe d'essence
lessee who was paying attention in art history class...
Brian did you mean Ce n'est pas une pompe à essence? What else could it be?
pic
Ce n'est pas une pompe d'essence
lessee who was paying attention in art history class...
Brian did you mean Ce n'est pas une pompe à essence? What else could it be?
Mike L,
I've got a good idea. Buy it, put it on there and then show us pics on how you did it and how well it works. Then we'll all know.
I've got a good idea. Buy it, put it on there and then show us pics on how you did it and how well it works. Then we'll all know.
rchristensen
Well-known member
- Joined
- Aug 12, 2006
- Messages
- 933
- displayname
- Richard Christensen
Mike L.
As far as Cub attachments I think a winch would be very low on my priorites.
First of all you don't have enough weight to pull anything very big, without being tied off to a tree.
Unless you are getting stuck all the time a chain and another tractor should be adequate.
The only other purpose I could think of would be some sort of lifting boom and that could be dangerous because of the short wheelbase of the cub.
Its your money, your Cub, and you may have some other ideas.
Winches on the right vehicle at the right time can be worth their weight in gold, but they can also be very dangerous.
Just my .02 cents.
As far as Cub attachments I think a winch would be very low on my priorites.
First of all you don't have enough weight to pull anything very big, without being tied off to a tree.
Unless you are getting stuck all the time a chain and another tractor should be adequate.
The only other purpose I could think of would be some sort of lifting boom and that could be dangerous because of the short wheelbase of the cub.
Its your money, your Cub, and you may have some other ideas.
Winches on the right vehicle at the right time can be worth their weight in gold, but they can also be very dangerous.
Just my .02 cents.
Richard the only reason i was thinking of it because at work we sold atvs but don't now. and all are parts are gone but we have a atv winch that i can get for free or next to. when there on a atv there pretty much useless any way i just thought maybe i could find a use for it. a cub does weigh more than a atv anyway.
Similar threads
