Archive through November 03, 2009

[mkopishke]

QA 42 Snowthrower for sale. I used it a few years ago and it worked well. The auger has a few dings in it but that seems pretty normal.

Pickup only, in Liberty, ME. Email address is in my profile.

$200

 

[kredlinger]

Brinly cat 0 3pt tandem disk. Used several times this year. $350
Also have a cat 1 box scraper that I changed around to fit cat 0 3 pt. $225
Could deliver to Kewanee, Illinois area Nov 13th or 14th to buyer or pick up near Iowa City, Iowa.

 

[krandall]

I've got a couple more things that need to go....
First off I have 2-sets of Cub wheel weights...$125.00 a set...
Second is a 54" wide frame blade..Could use a new cutting edge and will need one shoe...$150.00

Want to add Hyd lift to your 129 or 109? I've got a 149 with no motor..$100.00

Still have the "Snowplow Special" for sale..be the envy of the neighborhood $200.00 O.B.O.

And a 44" mower deck that came off a 1000. Sharpen the blades and you in business $150.00

I can bring any of this with me on my run from up north to Louisville in acouple weeks if it will help....Thanks...Kurt

 

[rajohnson]

For Sale: 782 Cub Cadet with newer KT17 Series II (low hours) and 50” deck. Serial number for the tractor is 2050594U673998. Built in either ’79 or ’80. Great tractor, manual for both the tractor and engine included. $1200 picked up in Marengo, IL. Please e-mail [email protected] for pictures.

 

[jthompson]

Few items for sale. Prices do not include shipping. email [email protected]

Gas tank support and straps- $15
Clutch cover- $15
S/G- don't know condition- make offer

Air filter bracket- $25

Steering wheel- $15

Tunnel cover- $15

 

[jspicer]

My previously listed CC 169 is sold. Still have the 126, price drop to $300. Wide Frame rear lift with bottom bracket price drop to $85 plus shipping. Narrow frame rear lift, comes with bracket for 106-147 and bottom bracket, price drop to $85 plus shipping. Headlights still available with correct tail lights and light switch, package together for $75 plus shipping. Let me know if ya need pics or have questions. [email protected]

 

[snicklas]

Jim T,

Does the wideframe tunnel cover have the lever for manual dump valves? I am not 100% sure looking at the picture.

Thanks,

Scott

 

[jthompson]

Scott,

It does not. It was on a 1650 which had the auto-relief valves. Let me know if you have any other questions.

Jim

 

[fcurrier]

Gas tank and fittings from a 1200:

Cap is missing plastic top. $40 includes shipping.
Tank mounting assembly from a 1200.

$40 includes shipping. $70 for the whole unit in 1 package. Email in profile.

 

[bnolte]

Parting out my old "Heirloom 102"

It was a complete tractor, the engine, steering, and transmission are toast, and I'm keeping the front wheels to mount tri-ribs for use on my 129 for snowblower duty. I'm also keeping the starter generator, and have pulled the voltage regulator off. It does have a usable rubber seat, some decent sheet metal, including a decent hood, seat pan, and the rear tires hold air, though they are weather checked and have tubes.

I'll take $75 for the whole shebang, but I might consider selling bits off of it if nobody wants to pick it up.

Pickup only for the tractor, I live in Maryland about 20 miles Northwest of Baltimore.

 

[jschultz]

129 Hydrostatic for sale

Includes snow plow/blade and 48" mowing deck.
Does not have carriage to hold mowing deck.

I do not have the rod that goes between the lifting lever and the plow.

http://s805.photobucket.com/albums/yy333/olddodgetrucks/CubCadet129Hydro/

I replaced the coil and the starting relay.


Runs good. Sometimes puffs smoke on startup. Sometimes back fires if you turn it off when engine is at full throttle.

Tires hold air.

The battery holds a good charge
the discharge/charge gauge bobs between charge and discharge while running. So I am not sure if it is not charging all the time or the gauge does not work correctly. I drove the kids around for over two hours the other night pulling them all behind on a blanket. Battery was at 12.97 volts when I started and ended at 12.89 volts.

I was going to fix it up but am moving a couple states away and don't have time to fix it up before the move. And will have too many projects once I get there. If I don't sell it, the kids will be happy because then they can keep driving it around the yard.

$225 obo

willing to separate

 

[mfrade]

Matthew K. check your e-mail please. Or did your program scrap my e-mail to you?

 

[mstetar]

ok as much as i hate to do it i need to sell my CW-36 snowblower, ive never mounted it but its in very usable condition, the only thing it needs is greesed and the chain is rusted up pretty bad, the gear box has has very little play and turns smooth, the augar has usuall bent ends, it has some surface rust but is in over all good shape for being 40+ years old the cabel thet turns the chute also needs replaced, but thats no big deal $120 OBO

 

[pmcmartin]

Brinly Planters. KK-350 with plates and manual. Price $300. KK-520 with plates and manual. Price $400. Phil McMartin. Oakland, Ia. Phone 402-490-2168.

 

[lpalma]

Mower decks for sale.
2-38" from a 100 and a 70. Both spin freely. One is missing a pulley cover.Wheels are good.Bearings are good.$50.00 each.
One from a wide frame. It is a 38c.Bearings spin freely but the center bearing is a little loose.$30.00
1 46c mower deck need new pulleys.Bearings are good.$50.00 No holes are bends in any of these decks.Local pickup only.

 

[junderwood]

For Sale - Hyd angle 42" Blade for Wide Frame. Looks to be in good shape. I just don't have anything to put it on. The subframe has been repaired at the cross bar but looks good. $250 Picked up in Peoria, IL

 

[mdechristopher]

48 inch original cub cadet spring cultivator it will fit any cat o hitch $150.00

 

[bruhman]

dash panels,$125.00 each. 207-838-0001

new old stock

 

[bruhman]

wide frame spring assist. N.O.S. un-opened box.$125.00 207-838-0001

 

[bruhman]

126 Graphics package. N.O.S. $150. 207-838-0001