Archive through March 23, 2008

[dthomas]

Hi all, new here and I have a model #2 lawn cart to sell. Solid, no rot, straight axles and good tires. NO TAILGATE.
$125 buyer pays shipping and related cost from 13215 zip.

Thank you
Dan

 

[jdonovan]

Headlights--72,104,105,124,125 complete with instructions...$100/+shipping
Fender Reflectors--untouched. nicest I've seen $50/+shipping
Hit enter after every picture.

Hit enter after every picture.

Hit enter after every picture.

 

[sblunier]

For Sale:

Re-listing of the 582 I have for sale with updated pictures. What you see in the pics is exactly what you get.

Engine has been replaced at some time in this tractor's life. Less than 10 hours ago, I did the following to the engine:

New: pistons, rings, valves, gov. gear....honed bores, lapped valves.

Rebuilt: carb, fuel pump, repaired and repainted sheetmetal.

Tractor comes with sleeve hitch, spring assist, Good-Year 10.50 ags w/fluid in tubes, creeper gear, cast-iron rear with 19T second, rear work light. Main drive clutch was rebuilt just bfroe I bought it by a Cub dealer.

This is a sweet little plowing rig (some of you have seen it in action). Only selling because I just bought a ZTR and need the room in the shed.

Tractor is running in pics....

$800 or email with best offer.

Can deliver to 4/12/08 plow day in IA for free. Located in Central IL. Email is in profile.

Thanks

 

[sblunier]

582 is sold pending delivery arrangements.

Thanks for all of the interest.

 

[dboileau]

Hello, I have a narrow or wide frame creeper drive with the gear for $150 and a danco under drive for original for $200 obo. The danco is copletely rebuilt all o.e. The creeper is in good working condition. I will ship with in reason from Ct.

 

[sblunier]

For Sale

Ertl Cub Cadet "Tuff Trax" off-road tricycle. (I think these are no longer available)

Little Steven and Emma are both too big for it and it needs to go on to the next future Cub driver.

Never been left outside, in 99.9% perfect condition.

$70

Free delivery to IA Plow Day, otherwise picked up at 61548. I will ship if I have to for actual shipping costs, but prefer not to.

Email is in profile.

 

[sblunier]

Trike is sold, Thanks!!!!

 

[pwarfle]

(2) narrow frame snow blades listed on 3-22 sold.

 

[dmull]

1872 is sold and home in Ohio

 

[jsandegren]

Has anyone seen this ad before? Have Cubs ever been offered with skid plates and seat belts as IH equipt? LOL

 

[jsandegren]

OOPS... wrong room,Srry...

 

[kmcconaughey]

For sale a rebuild kit for a 10hp K241. This was with a 105 parts tractor that I recently bought and I have no need for this so it must go. I believe that the retail cost of all this is around $70 I'll let it go for $50 plus shipping.

Here's what is included:

Gasket kit with oil seals (part# Sub-72615)
Points (part # 31-1823)
Condenser (part# 31-1844)
Connecting rod (part# 510-321)
0.010" piston and ring set (part# 23-6746-010)
And a Champion HC-10 spark plug. (I think that's the plug number anyway....)

 

[fschmitz]

All parts off 84' 580 16hp briggs
-44c deck complete with belt
-Mule drive for deck
-electric pto
-deck lift lever with rock shaft and height gauge

All for 75$ pick up at 08854 in NJ

 

[rporter]

For Sale : 102 Cub cadet Needs throw out, and bearing in top of steering column, Probably needs rings. Had the head off to install gasket everything looks good but smokes some, Rubber looks real good but a little dry cracked Seat is from off topic tractor, gears seem good but will slip out of reverse. It was born (I think) in June 1966. Tin looks great except some little bumps in front edge of hood I think wheels have rattle can paint job but rest looks like its 40 years old. (better than me.) Can't send pics wouldn't know how anyway. lolasking $400 wo deck, $450 w Deck. You pick up here unless I can make Iowa PD Thanks RichP

 

[lbuttke]

Plowday special.
New, still in the box. Brinly cat.0 cultivator.
$200.00, stop by on your way to plowday or on your return trip and pick it up.

No shipping on this
dont bother asking

 

[kmcconaughey]

The K241 engine rebuild kit is sold, thank you to all that inquired.

 

[gfedwards]

I have freshly rebuilt Kohler K series carburetors for sale. These are genuine Kohler (Carter design) carburetors--not Walbro. I have them to fit the 7hp Originals, 10-12hp #26 carbs, and 14-16hp #30 carbs. No core required but I may give a credit towards the rebuilt one. I have years of experience with carburetors and I rebuild dozens of them every year. I have nothing but positive feedback for them. I completely disassemble the carburetor, soak it in professional grade cleaner, hand clean the carb and parts, pressure clean the passages, install a quality USA made rebuild kit, replace any worn or bad parts, and rough adjust the settings. I also remove the welch plug and hand clean the low speed fuel circuits. I then replace the welch plug by driving it back in like the factory does but I also seal it with professional 2-part metal epoxy. This ensures it to stay in and not leak. I use new brass butterfly screws and install them with blue Loctite to help prevent them from loosening. Any part that is worn, missing or damaged is replaced with either good used or brand new parts. I stock brand new main fuel needles and main fuel nozzles and install them if necessary. All parts are removed before cleaning..ALL. No part is left untouched or un-inspected. The small 7-8hp carburetors are $65. #26 carbs are $75 and #30 carbs are $85. Brand new fuel bowls installed at an extra $10 charge for that "brand new" look. These are prices are already discounted down from my normal price for anyone from the forum. Savings are about $3-$10 off my normal price depending upon the carburetor size you choose. Shipping is $9.00 flat Priority Mail shipping cost to anywhere in the lower 48 states and that includes delivery confirmation and full insurance to protect your investment. No core is needed but I may deduct from the total cost for a good usable core. Email me for any additional information or you can call me at 434-996-5549. Below are some samples of my work. I stand behind what I sell. The first picture is of a small 7-8hp carb. The rest are the larger #26 or #30.
Thanks.

 

[mmasheris]

Wideframe-82 series subframes for 42&54 snowplows.New with extra stiffener at the rear to keep from spreading frame Can bring to Plowdai in Iowa $80.00 each 4 available.Also have doubble lower Brinly hitch brackets $40.00 each.

 

[mmasheris]

Picture of 2 part Brinley lower hitch $40.00 at Plowday in Iowa need to know how many to bring limited supply.

 

[junderwood]

For sale - CC70 good running, big battey box tractor that would be good for a restore or user. Rear tires are OK front's need replaced, usual seat crack, amp guage in the dash, second hole in tunnel, new battery last year. The seat mount and spring are in primer. I replaced some goofy PO fenders and seat mount with these. $250 obo picked up in Peoria, IL or delivery to PD15 in IA April 12th

Also have a KT17 series one. It will need rebuilt. It has a lot of blowby and was pushing oil out the breather and seals. It still ran ok and would be good for someone with a blown engine. It includes only what is pictured plus the blower and side tines that is not pictured. No starter, PTO Clutch, Muffler, or fuel pump. $100 picked up in Peoria, IL or delivered to PD15 as well.

42" stamp NF deck. This is in good shape just needs needs wheels. $50 picked up in Peoria, IL or delivered to PD15 in IA.

42" Cast end NF deck. Surface rust, some pitting, no rust through and was being used when I bought the tractor it came on. $50 picked up in Peoria, IL or delivered to PD15 in IA.