• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.

    Why Join?

    • Exclusive Access: Gain entry to private forums.
    • Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
    • Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

Archive through March 19, 2010

IH Cub Cadet Forum

Help Support IH Cub Cadet Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mharrison

Member
Joined
Dec 5, 2006
Messages
18
displayname
Mike Harrison
Almost new seat springs from a 1872. $10 for the pair plus 7 pounds UPS ground from 32736.
187012.jpg

Almost new seat, says Cub Cadet on it,$75 and I'll pay the shipping.
187013.jpg

187014.jpg
 
Grill from a 1872 fresh out of the dishwasher. Still has a little grease on the back, no charge. Still has tabs on it, $50 and I'll pay the shipping.
187020.jpg

187021.jpg

Aluminum nose piece from 1872 also fresh out of the dishwasher with four tabs intact. $100 and I'll pay the shipping.
187022.jpg

187023.jpg
 
I have a stack about 40" tall of parts manuals (originals through supers, and attatchments), owners manuals, service manuals, installation instructions, sales literature, etc. I will sell it as a lot or email if you're looking for something specific.

NOS dash panel for 86, 108, 125 $50

I also have a very nice 1250 that I will be parting. Has 1" front spindles, aluminum grill housing and axle housings, internal brake rearend, 50" deck with front wheel kit, etc. Most of it is in really nice shape. Email with needs, parts can be picked up at plowday.

187030.jpg
 
I am going to get rid of my 149 Cub Cadet. I am asking $650. Forum members get it for $600.00. It would come with a snow plow. It has new brakes, wiring,points,new battery and a rebuilt carburetor. Email with questions.
 
Clearing out even more parts. QL engine mount rails, fuel tank bracket and straps, QL tunnel cover, steering wheel, etc. etc. I would like to sell this stuff rather than just junk it. Prices do not include shipping.
$15 for engine rails
$15 for tunnel cover
$15 for fuel tank bracket with fuel tank straps
$15 for steering wheel
[email protected]
187096.jpg

187097.jpg

187098.jpg

187099.jpg

187100.jpg
 
NF 3 point hitch with double lower bracket. $150
Headlights off 126 and new tail lights- $85
Kohler engine shroud- $25
Sleeve hitch- $100
Prices do not include shipping costs.
[email protected]
187109.jpg

187110.jpg

187111.jpg

187112.jpg
 
Set of lights(worked two years ago) and insert from a 1872. $25 includes shipping.
187182.jpg

Set of tires and rims from an 1872. Will sell separately or together. $75 for the pair of rims plus UPS ground shipping. $100 for the pair of Carlisle 26x12.00x12 almost new tires plus UPS ground. The one on the bottom(left on tractor) may have a slow leak, its hard to tell as the tractor has been up on blocks in the barn.
187183.jpg

Side panels from 1872, $75 for the pair plus shipping or you can pickup in central FL.
187184.jpg

18 horse Kohler Magnum engine, has not run in two years. Had an oil leak out the front. Original engine with 842 hours. Cub dealer went out of business and the New Holland dealer won't work on cubs. $300(should be that much in parts) pick up only. I should have it out this afternoon.
187185.jpg
 
I have a Cub Cadet 482 for sale..I have rebuilt the carb, cleaned and replaced the fuel gauge/cap, and all fuel lines..Am asking 300.00 OBO.The problem I am facing right now, is that it will not stay at a steady idle. It wants to run past wide open. In my area, there is a lack of willing service techs to do the repairs. contact me via email for pics...Thanks for looking..Curt
 
IH Cub Cadet 782 with ALL attachments

I bought this whole setup from an older lady about 2 years ago. The tractor was just service and runs GREAT! Engine doesn't leak anything. All of the implements are in EXCELLENT shape and work well. I will include everything pictured including the belts which are like new. Everything has always been garaged. It does need a new seat and some fresh paint, but that's it.

I have more pics if you would like them.

If you have any questions, please ask.

920-248-6878

Im asking $1200 for the whole setup.

187241.jpg


187242.jpg


187243.jpg


187244.jpg


187245.jpg


187246.jpg
 
Thanks for all of the interest, but the 782 is sold. All I have left is the snow thrower.
 
For sale ; IH Power Lawn Equipment sign. It came from a Cub Cadet dealer in south west Ohio that went out of business . I was going to add a rear light and mount it on a wall in my shop but my space allocation has disappeared. It is 60”X36’ does not have any cracks but it does have a few smudges and marks. I would like to get $40.00 for it. I can help with the shipping by building a wooden frame to ship it in free. You pay for the shipping of your choice from my residence southeastern IN 47060.

187282.jpg
 
Driveshaft from a 1872, may fit other supers. It is straight and the fan is in good shape. $20 plus nine pounds UPS ground from 32736.
187334.jpg
 
Gauges for sale from an 1872. $10 for the solenoid, $8 for the key switch plus shipping. Best offer on the rest as I don't know what they're worth. 949 hours on the hour meter. Can go first class or priority. If you want first class there will be no refund if the PO loses it.
187337.jpg
 
Model 1A tiller. Works well. Surface rust only. Includes long belt and belt guard. $225 obo.
187341.jpg

187342.jpg
 
I have for sale a super nice cub cadet tiller that will fit an original, 100, 70 and it should fit many other models. I took it off of a cub cadet original. This tiller comes with the gear box and all. I am asking $350. I live near Peoria IL, but might be able to help with delivery for a slight fee I will be traveling as far east as Pittsburg PA within the next couple of months. Just email me with any questions.

Email for pictures
 
Mower deck discharge chute, very nice. $45. shipped any where in U.S.A. 207-838-0001
187384.jpg

Hydraulic cylinder, works fine. $55. shipped,
187385.jpg

$40. shipped
187386.jpg
 

Latest posts

Back
Top