Archive through June 21, 2008

[dmull]

There are cubs in Florida!
50A Deck w/ '82 series hanger & belt $50

Haban 402E that came off a narrow frame Cub. Missing pully that drives box. $350

 

[gpapa]

WTB: Proper throttle and cable for CC 100. E-mail [email protected].

 

[ehall]

I need a deck and the under carrage for a 107.
eaton Ohio 937-456-7774

 

[dsacksteder]

Tiller that fits on narrow and wide frames, wide frame snow plow, wheel wiehgts.

 

[kmuller]

looking for a good 18 magnum kohler to replace a bad engine in my 1810. Preferibly somewhere close to Maryland but will be interested in any good engine at an affordible price [email protected]

 

[kspeer]

Just got a 122 in good shape ,need a a few things
deck stop, clutch/drive shaft cover, and deck pulley guards for a 48inch deck, old style not the quick release,, if anybody has them let me know, thank you Ken,,

 

[mstetar]

Hi i really want a descent shape 100 but not restored i want to do a little work to it my self... but ill take what i can get
Please let me know if you have anything thanks
[email protected]

 

[thoffman]

Looking for a IH or CCC 582 in good running order near the Northern Illinois area.

 

[mtoney]

Looking for a hood ornament for my 782d, as well as the chrome IH for between the headlights. Thanks Mike and Michele T

 

[ading]

I am looking for a rear PTO for a 126 and a 129 If you can put one on a hydro?

 

[ksanders]

Andrew, You can't put a rear pto on a hydro. There has been a few rear pto's on ebay lately though if you feel like looking there for the 126. Hope that helps.

 

[proessler]

Looking for Model 450 snow blower to repair buddy's abused one in record snow this past winter. Primarily looking for auger assembly ... We are Located in southern WI.

 

[cspencer]

looking for a clean dash tower for a 71..with key switch and choke cable,with engine mounting bracket, a plus..will buy, but have many parts to trade..maybe i can help you out..let me know what you are looking for..thanks

 

[dtanner]

Still need a throttle for my Cub Original (1961) please email me if you have it and the price
[email protected]

 

[bcarl]

Looking for a 122 dash tower. Mine cracked along the frame mount on both sides. I was going to weld it, but it's rusted beyond repair.

Thanks!

Bruce

 

[thoffman]

Hope I don't piss off Charlie but not having any luck.....I'll give it a shot here. Looking for a ride for a 82 series in eastern PA someplace further west. Could hepl out on gas $$ on your trip!! Email at [email protected]

 

[dmull]

Looking for a set of decent 3/4" wide frame spindles.

 

[lhinds]

I need A bracket the neutral return rod hooks into on A 147. It fastens on the clutch rod with a roll pin. Number is 759 3106. Or 959 3106 On parts lookup 147 brakes and connections it is no. 20.
Checked the sponsor boxes above and couldn't find one. New or used is o k. Thanks in advance.
Send price shipped to 38556
Luther

 

[lhinds]

The neutral return part has been found, Thanks Guys. Luther

 

[gklocke]

Need a trans/rear end for a 1320. How can I find out which other models trans would fit the 1320? Gary 815-789-3146