Mower deck wheels, shoulder bolts

[jack casey]

On the CCS site, I ordered 7" Arnold Steel wheels # 750-GO-490-321-001 and two slots below are the shoulder bolts #IH-479427-R91. These were to fit the oem mower on my CC 102; the site shows two types of bolts to fit either steel or plastic wheels. The bolts I got do not fit a steel wheel, they are 2" long, the portion in the wheel hub is 1 3/8" and the thread length is 5/8." Thread must be at least 1/2" longer to be secured by a nut. Been unable to contact Digger, can any of youse guys/gals help?
Thank you.
Cheers,

 

[lpalma]

Digger is the man to contact, shoot him an email and be patient as he prolly is fulfilling orders at the present time.

 

[jack casey]

On the CCS site, I ordered 7" Arnold Steel wheels # 750-GO-490-321-001 and two slots below are the shoulder bolts #IH-479427-R91. These were to fit the oem mower on my CC 102; the site shows two types of bolts to fit either steel or plastic wheels. The bolts I got do not fit a steel wheel, they are 2" long, the portion in the wheel hub is 1 3/8" and the thread length is 5/8." Thread must be at least 1/2" longer to be secured by a nut. Been unable to contact Digger, can any of youse guys/gals help?
Thank you.
Cheers,

Digger has not stocked these bolts due to cost, they be $16.97 per. Getting two for me.
Cheers

 

[jack casey]

On the CCS site, I ordered 7" Arnold Steel wheels # 750-GO-490-321-001 and two slots below are the shoulder bolts #IH-479427-R91. These were to fit the oem mower on my CC 102; the site shows two types of bolts to fit either steel or plastic wheels. The bolts I got do not fit a steel wheel, they are 2" long, the portion in the wheel hub is 1 3/8" and the thread length is 5/8." Thread must be at least 1/2" longer to be secured by a nut. Been unable to contact Digger, can any of youse guys/gals help?
Thank you.
Cheers,

I'm posting again about this problem.
In a later conversation Digger said "Oh, that deck!" The shoulder bolts mentioned above do not fit my mower; the correct ones are $16.00 and Digger says he doesn't stock them due to cost. Says he'll order a few. That was a while ago.
No stickers on the mower but a stamping - A72415 R1. Anyone out there have these bolts?
Help, please. Jack

 

[digger]

I'm posting again about this problem.
In a later conversation Digger said "Oh, that deck!" The shoulder bolts mentioned above do not fit my mower; the correct ones are $16.00 and Digger says he doesn't stock them due to cost. Says he'll order a few. That was a while ago.
No stickers on the mower but a stamping - A72415 R1. Anyone out there have these bolts?
Help, please. Jack

Well if I could control the world these days and supply chain issues it wouldn't be a problem! I've replied to all your emails! They are coming from Cub Cadet! If you don't want to wait, there's sponsors listed at the top of every page that sell used ones!

 

[mgonitzke]

I would be surprised if McMaster-carr didn't have something that will work.

 

[digger]

I would be surprised if McMaster-carr didn't have something that will work.

Not that I've found, They have extended threads.

 

[jack casey]

Well if I could control the world these days and supply chain issues it wouldn't be a problem! I've replied to all your emails! They are coming from Cub Cadet! If you don't want to wait, there's sponsors listed at the top of every page that sell used ones!

I have your message "Oh that deck" on June 12, responding to my new email (set up in May). No other emails from you. Messaged you Jun 13 and 21 using that new email. Perhaps you used the old Verizon version. Please pursue Cub Cadet, it's only a couple of bolts.
Jack

 

[dhuss]

Put a 3/8-16 Heli-coil in the wheel mount ant use the stuff you got ,