Cub cadet 149

[Barrycardin]

Anyone out there that can tell me where I can get a hydro pump gasket , for a 149.

 

[dschwandt]

Are we to assume you are talking about the round gasket between the pump proper and the differential housing?
Part #23
#921=3004

Try CCS up above, one of the site sponsors.
Or, any Cub Cadet dealer worth their salt should have this item in stock, but don't hold your breath on that one!

 

[1811Cub]

Make sure that the one you are getting is CORK. They are much better than any other alternative.

 

[digger]

Anyone out there that can tell me where I can get a hydro pump gasket , for a 149.

It's amazing what you can find hittin one of those sponsor buttons. ;-)

https://www.ccspecialties.org/hydroparts_holddowns.html

 

[mgwin]

Welcome to the forum Barry!

 

[RAllison]

Don't screw around with others,get it from CC Specialties and have it right the first time around!

 

[wh cc guy]

Welcome Barry. Listen to RAllison above. It's good information on where to buy parts.

 

[mgwin]

Take inventory and see what all your tractor needs. Then look around on CCSpecialties website for all you may need and/or want. There's a lot of nice stuff on his site.

 

[digger]

Take inventory and see what all your tractor needs. Then look around on CCSpecialties website for all you may need and/or want. There's a lot of nice stuff on his site.

Thanks man!

 

[Barrycardin]

Are we to assume you are talking about the round gasket between the pump proper and the differential housing?
Part #23
#921=3004

No #30 I believe.

Try CCS up above, one of the site sponsors.
Or, any Cub Cadet dealer worth their salt should have this item in stock, but don't hold your breath on that one!

 

[Barrycardin]

No #30 I believe.

 

[Barrycardin]

Make sure that the one you are getting is CORK. They are much better than any other alternative.

 

[Barrycardin]

Take inventory and see what all your tractor needs. Then look around on CCSpecialties website for all you may need and/or want. There's a lot of nice stuff on his site.

Thanks for the info I will give it a try.

 

[Barrycardin]

Welcome Barry. Listen to RAllison above. It's good information on where to buy parts.

I have tried there . It shows the part is no longer available. I’ve tried to make one , can’t seem to stop it from leaking. Any suggestions?

 

[digger]

I have tried there . It shows the part is no longer available. I’ve tried to make one , can’t seem to stop it from leaking. Any suggestions?

Did you not see my post above?
That gasket is STILL available and I have 60 in the bin right now, LOL

 

[Barrycardin]

Yes I did. That’s not the one I’m looking for. I need the one that goes between the pump housing . The hydro pump I have was stuck , from sitting so long. I took it apart and cleaned it up. The gasket tore can’t reuse it . I think it’s # 26 on the parts diagram.

 

[digger]

Yes I did. That’s not the one I’m looking for. I need the one that goes between the pump housing . The hydro pump I have was stuck , from sitting so long. I took it apart and cleaned it up. The gasket tore can’t reuse it . I think it’s # 26 on the parts diagram.

https://www.ccspecialties.org/hydroparts_holddowns.html

 

[mgwin]

That gasket would be almost impossible to make. Go on to Digger's site and go shopping and get r done.

 

[Barrycardin]

That gasket would be almost impossible to make. Go on to Digger's site and go shopping and get r done.

Thanks I will do that.

 

[Barrycardin]

https://www.ccspecialties.org/hydroparts_holddowns.html

View attachment 153538

https://www.ccspecialties.org/hydroparts_holddowns.htmlThanks Digger.

View attachment 153538