• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.

    Why Join?

    • Exclusive Access: Gain entry to private forums.
    • Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
    • Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

Archive through September 01, 2015

IH Cub Cadet Forum

Help Support IH Cub Cadet Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
John, I believe he is referring to the pin on the "attaching plate" that mounts to the rockshaft. There is no bushing on that end.

298828.jpg


From the install instructions for a 1x6/7.

Doug, if you can wait a few hours, when I get home from work today I'll see if I can find (not sure where I hid it) the uninstalled narrow frame 3 point setup that I have.
 

Attachments

  • 298828.jpg
    298828.jpg
    62.6 KB
i have a load tester at work, ill get it charged and throw it on some load. thanks for all the help guys and ill keep you all updated on whats going on.
 
I have would should be a non problem, but I can't get by it.
I am trying to attach a 48" mower deck to a 125. I have the deck attached to the sub frame, but the main drive belt from the PTO to the center pulley is banjo tight. I cannot loosen the adjustment any more. I am using what I think is the correct belt an IH-489397-R3.
I have looked at the 3 versions of the manuals on the topics page (they all appear to be the same to me). I have also searched the forum. The only thing I see different is on my 125 I have two bolts on each side of the quick hitch to bolt it to the frame whereas the manuals just show the one quick hitch bolt. I have taken some photos hoping somebody will notice something obvious I have not. I have temporarily disconnected the disconnected the two lift links in the photo.
298841.jpg


298842.jpg


298843.jpg
 

Attachments

  • 298843.jpg
    298843.jpg
    31 KB
  • 298842.jpg
    298842.jpg
    38.5 KB
  • 298841.jpg
    298841.jpg
    35 KB
James M.
Is what you have look like either of these 2?
Notice the many differences in the 2, which would make a difference hooking it up.
From the Parts Look Up.
298850.jpg

298851.jpg
 

Attachments

  • 298851.jpg
    298851.jpg
    81.2 KB
  • 298850.jpg
    298850.jpg
    61.6 KB
Doug, sorry it took so long, finally remembered that the lift bar was in my sand blasting cabinet waiting to be blasted. It's only been there for ~6 years...
blush.gif
I believe it should be a fairly tight fit, my setup is. Note, the attaching plate that I have is a reproduction one that I purchased from forum member Mike Masheris, the bar is an original used one.

298853.jpg


298854.jpg
 

Attachments

  • 298853.jpg
    298853.jpg
    97 KB
  • 298854.jpg
    298854.jpg
    103.6 KB
  • blush.gif
    blush.gif
    270 bytes
James, what do the runners look like on the 48" deck, round or flat? Can you post a photo that shows more of the deck details?
 
Charlie mine looks like the top photo you posted.
Kraig I will take some more photos in The AM and post them.
Thanks to both for helping.
 

Latest posts

Back
Top