Archive through June 19, 2009

[dmull]

Kubota gear reduction starter to fit 782D, 1512D, 1582, 1782 & like tractors- $150 shipped

Turbo and manifold off V1505-T Kubota - $175 shipped

 

[dwaits]

Cub Cadet 105 tractor for sale. My dad purchased this 105 Cub in Cullman, AL in 1968. It has a 42 inch deck it has always been in Alabama; garaged and well maintained with no rust. In the 1980’s the engine was replaced by a new Kohler 10 hp. Overall the tractor is in very good condition, runs great and has a new battery. It is ready to cut yards or be restored to show condition I have detailed pics if you want. I have the original owners manual, deck manual, sales brochure and accessory brochure. I wish I could keep it but I don’t have the space. I would like it to go to a collector that can appreciate the quality of the brand. It is located in Hartselle, Alabama. $595 256 520 9318

 

[jthompson]

Here is an auxillary hydro unit. I'm pretty sure this is the same unit that IH used for the Cubs, but this one came off of a Montgomery Ward tractor. $200 OBO or would consider trade for creeper.
price does not include shipping.
email [email protected]

 

[jthompson]

Here are some remaining parts off my 1650. Prices do not include shipping.
email [email protected]

Hood and headlights.
Hood- $40
Headlights- $75
Sell both together as they sit for $100

Tunnel cover- $20

Electric PTO- $40

Front cast iron grill- $35

Fiberglass dash and dash tin- $25

Engine mounting pieces, divider that bolts up behind the engine, "under belly" shield/guard- will sell the pieces for $15 each.

 

[cgbusch]

Cub Cadet 125 for sale. My brother said he wanted it but he changed his mind!

only $500 cash- NO trades, no payments
cub cadet 125 with hydraulic lift.

It has everything you need for hooking up implements in the rear lift for a garden plow.

The 125 has:
-cast iron hydrostatic drive train
-hydraulic lift unit
-complete sleeve hitch hookup
-turf tires
-12 hp cast iron kohler that runs very good
-runs great

- the internal brake doesn't work but it never has since I got it many years ago and it is hydro anyhow and I just use that to stop.
- the starter generator only starts, it doesn't generate. Has not been a problem since I only have to periodically charge the battery.
- comes with a worn out mowing deck which can be tidy'ed up

This tractor is great for landscaping and for using it with sleeve hitch implements.


pics:
https://www.ihcubcadet.com/forum/messages/5/151064.jpg
https://www.ihcubcadet.com/forum/messages/5/151065.jpg

 

[dwaits]

My Cub 105 is SOLD, thanks, David Waits

 

[warentz]

FOR SALE: 1-38" HIGH VAC DECK OFF 1535, 1-46" DECK OFF 1863,1-44 INCH DECK(FOR PARTS)DECK HAS RUST ISSUES IN HOUSING BUT OTHER PARTS ARE OK,ALSO PARTING OUT 129 WITH 42" MOWER.IF INTERESTED E-MAIL FOR MORE INFO.

 

[mhomrighausen]

Angel said to try and do a little tidying up before my surgery so here goes.These are from a parted 48" Cub Cadet deck from around 1971 era. E:mail address is in my profile.

Almost new (still have some factory paint), with just a couple of dings (nothing major), IH blades. Just surface rust. These are the hardened ones. These go for $40.00 each new price. $80.00 plus shipping.

Cast iron nosepiece only (48" deck 1971 era). The blue line is a hairline crack (hardly noticeable). I put the bllue paint so you would know where it is. This is for the nosepiece only. $5.00 plus shipping. If you want the wood roller which is very good.... $10.00 + shipping. The lift pieces are $10.00 for the pair + shipping.

48" Deck spindles. Tight and complete just rusty and ready to bolt on complete. I put the picture of the bent pulley so that you could see the bend. It shouldn't affect performance. $55.00 for the center, $50.00 for the non bent spindle and $45.00 for the bent spindle. All spindles plus shipping.

Right and left hand 48" deck runners. Good shape. Surface rust. $10.00 each/shipping.

Quick attach brackets. Rusty but usable. $5.00each/ shipping.

Side housing piece. No rust through holes. Bent a little. $5.00/shipping.

These are slightly smaller than factory wheels only they have grease zerks. They are usable only getting worn. $10.00 for the pair/OBO

Discharge chute underside picture. Rusty with holes in it. Good for a few more years if patched. You pay shipping plus $4.00.

I've no idea as to what Cub Cadet this critter fits. Very good spindles. Too nice to take to salvage. $15.00 + shipping. I won't separate for the spindles only.

 

[mhomrighausen]

Nosepiece and roller are spoken for.

 

[dmartinson]

169 Cub Cadet with hand lift, needs complete restoration, does not run, 16HP 341 Kohler, (need I say more) also comes with QA snow blower #2 rottotiller and 44" deck, also rear lift with spring assist, (608)213-4165

 

[dmartinson]

Here is some more pics of 169, also I forgot to put a price in previous ad, $800.00 OBO pick up near Oregon WI I can help with shipping for a price. thanks

 

[pclayton]

CC126 with mower deck, runs good. CC108 with mower deck. Dissambled with all new and used parts to make run. Plow, blade and disc attachmets. Pictures available. $1000. Located in Pensacola, FL. Phyllis Clayton 850-492-2224.

 

[mhomrighausen]

Pictures of these items are in the ad I posted on Sunday June 21, @ 1:51 p.m. I'm revising a couple of the prices.

Almost new Hardened 48" mower blades (set of three)... Now $80.00 shipped to your door. (U.S. only)

Choice of the deck spindles Now $50.00 shipped to your door. (U.S. only)

If you want delivery confirmation or insurance that will be extra.

 

[dross]

Narrow frame hydraulic pump and mounting brackets
$125 plus shipping from 61071.

 

[dwhipple]

For Sale or Trade: International QA42 Snow thrower that was modified by a previous owner to fit a wide frame tractor. I bought the unit last fall for use on my 1250 and used it this past winter and it worked fine. I would like to trade it for a QA42-A snow thrower that will properly work with my 1250 or sell this snow thrower for $ 150.00.

 

[cstrutzenberg]

Hydro Transaxle with rebuilt ported pump
$300.00 OBO Located in Minooka,IL 60447

 

[cstrutzenberg]

Here are some pictures of Hydro

 

[dmerkle]

I have 2 Brinly 10 inch plows for sale.
One plow has a newer style bolt together frame and the other plow has a welded frame.
Bolt together frame:

welded frame:

Points on both plows have little to no wear on them.
Asking $150 for each plow.
Buyer pays all shipping charges.
I will deliver plow to any show or plow day for free that I go to.

 

[cwestfall]

for sale model-86 runs good-350.00,70 roller-200.00,128 roller-225.00 73 runs good-350.00,all will have turf tires

 

[mbeadle]

this 1250 run and drives good.also the mower deck works just fine.the motor is the 12 hp kohler and it smokes.it is running in the pictures.uder a heavy load it smokes a lot.new rings needed.also mower deck wheels and headlight bulbs. 200.00