Archive through June 09, 2011

[jlgordon]

DOSE ANY ONE HAVE A NAROW FRAME PLOW FRAME THAT FITS A 73 CUB CADET IF YOU DO PLEASE EMAIL ME AT [email protected]

 

[dross]

Jessy, Leaving the Caps Lock on is how you yell on here. So young, so angry, Dam that rap music.

.
I do not believe the 14 an 16 exhaust elbows are the same.

 

[mbrennan]

I need 2 new deck pins and brackets for a 46" Deck on my 107. The ones I have now are worn and wobble a lot. So, it you have 2 with no wear please let me know.
Mike at 912 265 2741 or
[email protected]

 

[sstratton]

Hello All, I have a Neighbor looking for a set of 10 or 10.5 wide by 12" rims.... 5 bolt pattern commen on cubs,jd's,wh and other 5 bolt pattern machines.

He Ordered a set that where 12"wide and 12" rims...far to wide for 23x10.5x12 bar lugs.

contact me at [email protected]

SStratton

 

[jrlewis]

Need a clutch drive line with hanger for a 106. Don't care if rusty or clutch is bad I have none of it. no Shaft no springs, no collar, clutch, hanger or control rod. I am on hold untill I find parts to get it moving and using in the yard. Do not want too expensive.

 

[kweaver]

Scott - 10.5 goes onto an 8" wheel. You don't buy wheels to match the width of the tire.

 

[sstratton]

Ken, Thats what I told the neighbor as I picked up a set of 23x10.5x12 Turf tires on 8" rims and he said he already has a set of them rims and wants 10" rims, He bought a set of Pulling rims that was chopped and added center rings to make them true 12" inside each outter lip, But they are to Wide I told him,now that he ordered them and they arrived.

I Said to him we have 1 of two options...Cut out 2" from the rims he bought, or cut and add 2" to a set of stock 8" wide rims.. he would rather buy a set already cut and built to 10" wide.

So now i have a set of 23x10.5x12 turf tires on 8"x12" rims, and no need for them on my 1959 or 1963 david bradley riding tractors.
As they came stock with 6x12 tires.

I guess I won't buy first and expect a sale later again.

Thanks alot Ken for your advice.

Scott Stratton

 

[digger]

So go to http://www.xtrememotorworks.com/ and buy'um!

 

[mbrennan]

Wanted:
Wide Frame carriage for a 108
Mike
912 265 2741
[email protected]

 

[ralbert]

I need a complete clutch assy for a Cub Cadet Original....in good working order ....zip code 33525

Thanks