Archive through February 01, 2008

[bcook]

My brother in law now has a nice 1864 with 54" mower deck in his barn

A big THANK YOU goes to Marlin Heinlein of Cub Cadet Warehouse!

 

[ebroberts]

Howdy Boys & Girls, I'm in the market for a QA36A snow thrower. I know about Ron Dehli's but its a long ways away. Any others? E-mail me to [email protected]. Thanks, Buck Roberts

 

[rdehli]

Looking for a blower housing aka flywheel shroud for a k 321 aqs without the duct to the carb TIA { same shroud as whats on a d$$%e TIA

 

[aaytay]

Looking for a set of headlights for a 70/100 series.

 

[bjohnson]

Found my blower! A nice QA42A. Thanks to all for the help!!! -Brian.

 

[bcook]

WANTED: I'm looking for a Kohler KT-17/Magnum 18 complete-rebuildable starter, carb and usable intake. Parts must be in good shape...not warped/cracked/stripped/junk, etc.

I'm wanting to do some fixing, and 'hot rodding' on my 1712

Please e-mail me....the address is in my profile
Thanks

 

[rgoodwin]

What you got in mind Bill? gonna do a little experimenting and not take a chance on messing up what you have already? I dont have any just curious email me if you would like, I would like to hear what you have in mind.

Rick

 

[jrallen]

Hi, Been a reader for a while but first post. Was given a 129, I have it running but one of the valves at the top of transmission, the reverse, is stuck. I know that new they are costly, was wondering if anyone has used but working for sale. Thanks, John

 

[rchristensen]

John Allen

Normally they can be freed up if you clean them good with a good cleaner and can get a hold of the tip and pull them up.

If not I have read about a place called LJ Fluid Power out of Delton Michigan that had them for a good price. Their phone was 269-623-4150 and they said to ask for LJ or Kevin. I haven't dealt with them just what I read on another forum.

 

[jrallen]

Richard, Thanks very much. I'll try some of the cleaners mentioned in past posts, and see what happens. John

 

[lhinds]

John Allen; Do A search for cleaning check valves. This was discused A few days ago.
Luther

 

[jthompson]

Need a deep sump oil pan to fit a 16 hp in a 1650. email [email protected]

 

[rkrueger]

Hello, looking for a good 3/4" spindle for the right side of the tractor (if your sitting on it) for a wide frame, like a 149 or 1250. (641)228-0822 or email Thanks

 

[khensley]

Hello

Still looking for the round fenders for a Cub 100

Thank you
Kelse

 

[bcook]

I have found the KT-17 parts I 'wanted' earlier (thanks to another member here)

NEXT UP:
I am looking for a good 'shell' of a KT-17/Mag-18 muffler.

Internal condition of the muffler isn't really important......
I'm going to attempt building a glasspack muffler like David Kirk 'invented' for his KILLER KOHLER engine.

Please e-mail me at:
[email protected]
if you can help!

 

[lgross]

Am looking for an aluminum casting, 8290, for my QA 36A snow blower. Mine went away after sucking up a buried power extension cord.
Thanks.

 

[digger]

L.D.
I dunno about everyone else, but I'm not sure what your lookin for man.

 

[digger]

This thing?

 

[lgross]

Digger,
Yessirree, Bob, that's the piece!. Mine looks sorta like that, except for where it came from together.
L. D.

 

[jdonovan]

Looking for headlights, taillights, switch for a CC 86.
thanks in advance