Archive through August 13, 2009

[lpalma]

I'm I'm, Posting Posting Twice Twice...

Tires and rims off a 782.16x6.50x8.00.8 rib.Rims are Nice and clean.These have 1" bearings that are in good shape.Tires are tubed and hold air,cracking on sidewalls $25.00 for the pair plus shipping

Tires and rims off a 1100.16x6.50x8.00. 8 rib.These have 1" bearings.Both do not hold air but the rims are in good shape as the bearings are also.$20.00 plus shipping.

1 Carlisle 16x6.50x8.00.Nice shape not dry rotted,plenty of tread.$10.00 plus shipping.

 

[mdechristopher]

For Sale: is a Cub Cadet 2072 super garden tractor. This tractor has a 50” deck, power steering, hydrostatic drive, dual disk brakes, new engine (2005), wheel weights and a 3point hitch. This tractor was completely reworked and repainted in 2003-2005 with all receipts. I have many attachments including: 3 point hitch, 48” landscape rake, 54” snow plow w/ hydro angle kit, original IH spring cultivator, Agri-fab heavy duty 17 cubic foot dump cart w/large tires and tail gate, 50 “ blade deck(new 2005). I also have the original 20 hp motor and clutch. The motor and clutch were working when I removed them in 2003 with 1061 hours on the motor. This is a great running tractor. The seat will be replaced at the end of this cutting season. $5,500.00 ask for Mark 703-407-2498. I have pics for anyone interested!

 

[cwestfall]

Cub Cadet Tiller With Gear Box surface rust but otherwise good and solid,200.00 picked up here ohio [[email protected]]

 

[lpalma]

1100 tires and rims are sold!!

 

[mgonitzke]

For Sale: 1 of 2345? 800s

If I had time to restore another one, I'd keep this, but I don't have time, so...

It's in pretty good shape...everything seems to work. The motor was rebuilt by the previous owner and is .010" over on the bore and .010" under on the crank, which looked pretty fresh. I put new rings in because the wrong rings were installed and it smoked really bad. It now runs with no smoke. This 800 has all the correct (read impossible-to-find) parts, including the small starter, muffler, muffler box, air cleaner, etc. The tin piece that goes on the block around the carb side is cracked, and the PO reinforced the cylinder baffle where the coil mounts by welding an extra piece of metal to it, but it's not realy bad. Other than that, it's nice and original. The seat isn't great, as you can see. Clutch has a few new parts by the PO...throwout arm and bearing for sure. I'll be making a couple of carb and governor adjustments and I have to clean the 44" deck. The deck is nice...baffle intact, no rust, bearings pretty good.

I'm asking $600 OBO picked up in Rockford, Illinois. If not gone by Wednesday the 19th, you'll have to wait about a week and a half and get it from my parents after I'm back in school. [email protected]

 

[mgonitzke]

800 is sold.

 

[mstetar]

Cub Cadet 445 rear engine rider, sat for long! time, most everything was siezed when i got it but a few of the wheeles loosed up, its all there as far as i can tell, i dont think the motor is siezed tho i can find out if your interested, im sure this is just for parts but if your a real diehard, i think it could be restored, im only asking $30 youll prob spend more on gas getting it so let me know if your interested

 

[mshelvak]

Hello,
I am looking for a running 107 does not need deck or dozer blade. just a running 107.

mark

 

[cwestfall]

1450 with 54" power angle blade,runs,550.00,# 40 box blade solid just surface rust 250.00 picked up here[ohio]
popjpeg{168312,1}

 

[cwestfall]

picture of 54" blade on 1450

 

[edomans]

For Sale:Gannon Earthcavator Decals. A faithful reproduction of the originals. You get 2 large Earthcavator decals + 2 small Gannon decals all for just $40.00 (shipping is included). Email me in my profile for more information...Elliott

 

[ndorn]

I am going to try and sell my 782D. It is fair to say it is as close to new as it can be if not better. If you are interested please check it out. I DON'T have to sell it, but it just sits here and since it is so perfect, I am afraid to actually use it. (It's ok to laugh here)

I have seen what others have sold for and they were no even close to as restored as this one. So if I don't get what I would like to, I have NO problems keeping it. Please read the ad if interested. You will be impressed. There are plenty of pictures to view also.
$5000 or an offer REAL close to it.

Let me know if you have any questions. Thanks guys!

 

[jdudding]

I am parting out a 1200 cub cadet if anyone needs/wants anything shoot me an e-mail and I will let you know if I still have it.Joey.

 

[vthomley]

Model 122 puller $700/offer

Has 16hp motor with a shaved head. Was dynoed at 34hp 2 years ago. Motor has the built in starter<font size="-2">(not a starter-generator)</font>. Charging system has been taken out of the circuit. Has a flat 10hp style oil pan. I would sell the motor separately.

Frame has been modified for the 16hp motor. The front axle weighs only 7 pounds, it is a custom tube axle which also lowered the front.

Rear wheels are not included, no weights are included, weight brackets are included! And the driver is not for sale. I have a set of turf 8.5-12x23 tires and wheels on this.

 

[jstouffer]

For Sale; Very nice 149 had new crate motor installed about 5 years ago,with wheel weights,tires where replaced new 2 years ago atv titans on rear,44 inch deck,cat-o hitch,lawn roller and pe-co leaf vacuum with 5hp motor. $1400.00 gets everything moving to El Paso Texas in 4 weeks from Mooresville N.C. will not need tractor there.

 

[rbeem]

For Sale: Neutered 149. Has good running 10hp k241 NOT the 14hp.

Just used it yesterday to sweep the lawn, runs great. (lawn sweeper not included)

The Good.
Straight hood, good headlites that work.
Good strong hydro and hyd. lift very miniumum if any leaks
Newer seat
good 8.50 turfs
unmolested frame
new driveshaft.
Narrow front wheels
motor is bored .010 and newer valves
steering spinner (you'll need it)

The not so good
rough rear fender pan and foot treads (looks worse in person, I promise)
tail lites are MIA
loose steering (remember the spinner?)
rough front tires

The pictures should tell most of the story.

Would make a good cheap starter for a young Cubber or I hate to say it....parts.

My reasonable negotiable price $250 picked up in Monticello,Iowa.

 

[daweber]

I have a set of armstrong power trac ag style tires. 4.80-8, like new condition. Nubs are still on. $55 to your door.

 

[mgallinaro]

FREE FOR THE ASKING. ONE NEW AND UNOPENED QUART BOTTLE OF CUB CADET GEAR DRIVE LUBE OIL. CLEANING OUT MY SHOP AND FOUND IT BURIED IN THE BACK OF A CABINET. FIRST COME/FIRST SERVE. E-MAIL ME AT [email protected] WITH YOU ADDRESS.

 

[mdechristopher]

Cub Cadet 2072 super garden tractor. This tractor has a 50” deck, power steering, hydrostatic drive, dual disk brakes, new engine (2005), wheel weights and a 3point hitch. This tractor was completely reworked and repainted in 2003-2005 with all receipts. I have many attachments including: 3 point hitch, 48” landscape rake, 54” snow plow w/ hydro angle kit, original IH spring cultivator, Agri-fab heavy duty 17 cubic foot dump cart w/large tires and tail gate, 50 “ blade deck(new 2005). I also have the original 20 hp motor and clutch. The motor and clutch were working when I removed them in 2003 with 1061 hours on the motor. This is a great running tractor. The seat will be replaced at the end of this cutting season. $4,500.00 Mark 703-407-2498.

 

[rdehli]

I really hate to do this but my daughters medical bills just keep comming { broken elbow}
for sale cub 123 1967 model
new ag tires in rear
new tri- ribs on front
headlights
3 point hitch
motor has been rebuilt about 3 years ago with only a hand full of hours since 10-15 mostly parade duty and lawn rolling.

asking $ 1200.00 obo in northeast Iowa