1450 hydro issue

[Jake Olsen]

I got my 1450 out for some driving today and has quit moving and the hydraulic lift also doesn’t work. It ran and worked fine for 5 minutes or so and then just quit. Full of oil and has a new filter on it. It does work a little bit at a idle and the lift is really jerky and slow. Any ideas for me thank you.

 

[mfrade]

verify the pins in the driveshaft. Sometimes they look good from the outside.

 

[Jake Olsen]

Oh yes I forgot to mention I did do that everything is spinning clear to the back and with a short screwdriver it is solid on the rear output shaft. At idle it will move but the pump whines pretty bad. Thank you

 

[mfrade]

What brand and # is the filter you installed?

 

[Jake Olsen]

It’s a stp s16. It’s what auto zone cross referenced for me. Napa didn’t have a 1410 and oriellys didn’t have a wix 1410. They will Monday.

 

[mfrade]

I have no idea what that filter is.. if their numbers mimics say a fram, then a 16 would be an engine oil filter. NOT a hydraulic filter.

 

[Jake Olsen]

Probably and that’s what pisses me off is you give a hydraulic oil filter number it should cross reference to a hydraulic oil filter not something else.

 

[mfrade]

And a lot of these companies just want to make a sale and call it close enough. And maybe that filter is the right one.... but I have a feeling it isn't, Call Charlie at CC Specialties, he'll solve that one quick enough.

 

[bwstevens]

I dislike tsc but they will have a filter from a zero turn that will work. Engine filters are much too restrictive.

 

[Jake Olsen]

Thank you for the advice. I just ordered 6 of the wix 51410 filters this morning. Probably going to have to wait until I get back from vacation. Leaving after work on Friday night and yanking the camper to Oregon. I’m 55 years old and haven’t seen the ocean and my wife thinks it’s time.

 

[hydroharry]

Jake - I'm not sure the Wix 51410 is a correct replacement filter. It might look nearly the same on the outside but I wouldn't be surprised if it does NOT have the correct internals. Hopefully someone on here will pipe in about their experience.

 

[jkoenig]

FAQ 83 acceptable hydro filters:
http://cubfaq.com/HydroFilterX.html
Provided by Roland of the fancy colored wiring diagrams. Should be good.

 

[Jake Olsen]

That is a great chart. Thank you. Sure beats the 104 others that cross referenced with the google search.

 

[jkoenig]

FAQs are jam-packed with excellent info:

Forums tab above, select IH Cub Cadet tractor forum, 5th thread. Study the others in the first six as well. These six are our "sticky threads".

 

[Jake Olsen]

Thank you. I do all of this on my phone and sometimes have a heck of a time trying to go back and forth. I really need to sit down with my laptop on and the phone and do a little navigating I guess.

 

[hydroharry]

FAQ 83 acceptable hydro filters:
http://cubfaq.com/HydroFilterX.html
Provided by Roland of the fancy colored wiring diagrams. Should be good.

Jim - geez, glad to know that cross-reference chart is there. Guess I'm not keeping up with Charlie's updates to the FAQs.