100 with carter N carb

[ole80grit]

I have a 100 with a carter N carb. recently purchased and not running right. I have play in the throttle shaft and want to add a bushing but my search is only coming up with Koehler carb bushings. anyone have a source for the carter N ones?

 

[mgonitzke]

Should be exactly the same.

 

[ole80grit]

Thanks it worked.

 

[digger]

I have a 100 with a carter N carb. recently purchased and not running right. I have play in the throttle shaft and want to add a bushing but my search is only coming up with Koehler carb bushings. anyone have a source for the carter N ones?

I've got throttle shaft bushings. ;-)

 

[ole80grit]

that is where I got it from thanks.

 

[digger]

that is where I got it from thanks.

Cool, thanks for the order man!

 

[dschwandt]

CAUTION!!
Be sure and file the "staked" portion of the tiny screws off flush with the shaft before attempting removal or they will break off in the shaft and then you really will be screwed!!

Then make sure the new ones are properly secured when installed, I usually bugger up the protruding threads with a small vise grips and also use a dab of thread locker as well.

You DO NOT want these little buggers backing out and getting sucked into the combustion chamber and causing havoc.

Good Luck!

 

[glippert]

Does that shaft bushing fit Walbro?

 

[digger]

Does that shaft bushing fit Walbro?

Have no clue, every Walbro I ever came in contact with got thrown away.