• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.

    Why Join?

    • Exclusive Access: Gain entry to private forums.
    • Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
    • Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

Search results

Shop deals on ebay
cub cadet used parts
kirk engines
Advertise with us
IH Cub Cadet Forum

Help Support IH Cub Cadet Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. T

    Archive through October 02, 2009

    My 1250 will not move. I started it to mow and it will not move in forward or reverse. It has been awhile since I went through everything. Aren't there a couple of valves I need to check? I just can't remember.
  2. T

    Archive through July 12, 2007

    I had a spiral pin holding the drive shaft on my 1250 that broke, the pin broke. I tried a roll pin but that sheared off. Now I am using a bolt. I can't think of a reason that a bolt will not work.
  3. T

    Archive through January 18, 2007

    44A Deck I am working on has had the rear wheels and shoulder bolts replaced before I got it. I need to know if those wheels are supposed to have an offset and what is the wheel width at the bearings. Also I need to know what length the shoulder part of the bolts are supposed to be. P.S. I...
  4. T

    Archive through January 13, 2007

    Ok, let me try this. What is missing from this mule?
  5. T

    Archive through January 12, 2007

    Thank you for the ideas on my idler. Could someone please post a picture of a mule drive for a 1250 with a 44A mower deck. I have had to assemble my rig with parts from different places and I think I am still missing something. If I had the manual it might help. I misplaced it though.
  6. T

    Archive through January 10, 2007

    I took the idler arm and pulley assembly off of my 44A deck to my 1250. I broke the bolt off that holds it to the deck. I then tried to get the bearing out of the pulley and ended up smashing it inside the pulley. Does anyone have some suggestions on what I need to do?
  7. T

    Archive through December 08, 2006

    K301 oil breather pads on a 1250. I have two pads, one is a small thick pad and the other is a little larger thinner pad. The picture in the manual just shows the small pad. I can't find where the larger one goes. I don't want interference with the breather reed. Is there a picture I don't...
  8. T

    Archive through December 06, 2006

    It is too bad my post on hydraulic fluid got cancelled. I really wanted an answer.
  9. T

    Archive through December 02, 2006

    Could someone identify this part. I am rebuilding my K301 engine and this one part is left over and I cannot find it on the parts list picture.
  10. T

    Archive through November 27, 2006

    Could someone direct me to a drawing of the engine wiring for a 1250? I am rebuilding my K301 and cannot find a diagram in either the IH service manual or the Kohler service manual that shows the engine wiring. My memory is not helping me either, part of aging I guess.
  11. T

    Archive through November 09, 2006

    I took the steering gear box apart on my 1250. After cleaning all the grease out I was dry fitting the side plate onto the gearbox and noticed that there is really nothing holding that "gasket" on the housing. It just seems like they could have designed something better. My first post I...
  12. T

    Archive through November 09, 2006

    I took the gear box apart on my 1250. After cleaning all the grease out I was dry fitting the side plate onto the gearbox and noticed that there is really nothing holding that "gasket" on the housing. It just seems like they could have designed something better.
  13. T

    Archive through November 07, 2006

    1250 hydrostat drive is leaking from the top plugs on the pump. I am thinking the only way to know what is going on is to take it out and completely apart. I took off the fluid filter and no oil came out. I took off the tube from the reservoir to the pump and the unit emptied. Any thoughts...
  14. T

    Archive through November 06, 2006

    I am rebuilding my 79 1250 (K301). I went to put the camshaft into the block and after inserting the rod noticed that the cam would not turn on the rod. I took out the rod and the cam shaft and determined that the cam was not easily turning on the shaft. I checked the shaft with a straight...
  15. T

    Archive through April 12, 2006

    Hi. I am new. I live in the DFW area of TX. I am working on a K301 engine that smokes badly. I am attaching pictures of problems I have found so far. What else might cause the blowing smoke?
Back
Top