• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.

    Why Join?

    • Exclusive Access: Gain entry to private forums.
    • Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
    • Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

Search results

Advertise with us
kirk engines
cc specialties
shop deals on amazon
IH Cub Cadet Forum

Help Support IH Cub Cadet Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. A

    Archive through September 11, 2016

    So I got my rear end out my hydro, but I think I bent it a little bit when i was getting it out. hopefully, it will go back together.
  2. A

    Archive through September 07, 2016

    Charile - Then what is the size of that hole? I would want to get a hook that is the correct size of the hole
  3. A

    Archive through September 05, 2016

    So getting my 12 horse power engine out of the tractor. Do have one question, How can I lift the engine out the tractor without lifting it by hand? Got all the wires un hooked, unbolted it. Looked at the valves, they dont sit right. SO I'm going to cut the seat and the value. See if that works...
  4. A

    Archive through September 05, 2016

    I plan on putting a vtwin in my 149, would I need to upgrade my wiring harness? then what harness would i need to get one for a ql series or 82 series? since those has stators and not a starter gen. Thanks to anyone who can lead me in a direction.
  5. A

    Archive through September 05, 2016

    Just two questions, on my 129 it only smokes at high rpm to mid rpm. Does not smoke on startup. Could this be a valve issue? And How would I go about putting value guides in? and has anyone put 15W-40 or 15-40 diesel oil in there small engines? I was reading some where that its should make your...
  6. A

    Archive through September 04, 2016

    Oh well, I got the LH Arm lift on the 149 frame drilled half way, If I can find a bit thats very long, then im in luck. but my teacher can always fabicatied a remade LH Arm that will go on my 129 soon to be the 149ish. Then I will just use the 129 to pull stuff around etc etc. I kinda have plans...
  7. A

    Archive through September 04, 2016

    Well chucs!! this is going to be a real pain in the @$$
  8. A

    Archive through September 04, 2016

    Well I found this to remove spiral pins, but does anyone know the specs of this?
  9. A

    Archive through September 04, 2016

    Well I got my 149 as a parts tractor, and a 129 complete. But I'm going to be swapping all the 149 stuff to the 129. But I'm stuck on removing some spring pins or spiral pins. Even the one on the lift arm for both 149 and 129. Is the a tool that can make removing these pins alot easier??? I...
  10. A

    Case IH reveals autonomous tractor

    What are your thoughts on the new tractor CIH Global*ists* had revealed? I think its a bad step for CIH do something like this. Link if your interested in reading a article...
  11. A

    Archive through August 29, 2016

    Mike Frade - Different Mike lol
  12. A

    Archive through August 29, 2016

    Marlin - Thanks for the offer but Mike F is wanting to trade me a 149 for my 128, and that would be a good deal becasue I don't have the space for 2 tractors lol. And the 149 would be a great project to work on. since it needs a motor mounted.
  13. A

    Archive through August 27, 2016

    Marlin - 4 hours would be too big of a drive and thats only one way. But I can always sell my 128 in area then wait or go get that 149 for 600$
  14. A

    Archive through August 27, 2016

    But I do have a question for you guys, my dad says a engine with dirty air breather its a bad engine. Are there any air breathers on a cub engine or is it only briggs? or he means dirty air filter is bad engine. but im sure most engines get there fitler dirty, so im sure its common for it dirty...
  15. A

    Archive through August 27, 2016

    Jeff - I kinda been going thru some stupid ideas lately, and I would say the best thing to do this 128 is get it running with the starter which cost me 70$ then I would sell it at 400$ then I would make 130$ profit then I could just go buy a 149 from ray in pa I would say that be the best thing...
  16. A

    Archive through August 27, 2016

    Jason - I might just go with making a 128 into a 129 then I will be happy with that. As I love wide frames but dislike gear driven. But if like a 149 shows up in my area in a few couple months I might just go buy that
  17. A

    Archive through August 27, 2016

    Jason - I could also like add the s/g then sell it then I could buy a 149 from ray weaver, bc I kinda did have my heart set out on a 149. But yesterday i was looking at a 149, would have gotten it but my dad said the air filter was very greasy, and I didnt look at the air breather if there is...
  18. A

    Archive through August 27, 2016

    Jason - I got rid of the 55, becasue I cant have more than one tractor else someone in my family will get pissy. and it did ran. Sadly I didnt get what I want out of it. and put alot more money than expected in it. And for the 1450, it sposlily not running but the guy wants double what I payed...
  19. A

    Archive through August 27, 2016

    Well I could have the option of trading a 128 for a 1450, I need to do is just get a S/G for cheap and I can get me a hydro asap lol
  20. A

    Archive through August 27, 2016

    Well I did get a good price on the 128 for around 200$ but there was a 149 just north of me and the other guy wanted x3 what i gave for the 128, and it had no deck or anything. but the guy couldnt get it to run so i asked the guy that had sold the 149 and he happened to have this, yea it would...
Back
Top