Sprayers and weed control

PACub100 · Jul 29, 2024

Well, it's been so dry and hot here in PA that lawn work has been very minimal, but the weeds have been taking over with a vengeance.

I've bought several pump sprayers over the past few years and they all quit after a year or two... and it's not like they get used every weekend.

Which leads to the question, what's a good sprayer that will last forever or close to it?

Also, what's a good brand of weed killer that won't kill everything it touches? I get weed killer from my dad (farmer) and dilute it for around the house but it'll kill anything it gets on...

Everettlee · Jul 29, 2024

I found running simple green through the pump after prolongs pump life
In the past I just rinsed with water

kzintner · Jul 29, 2024

I found Speed Zone is a good weed killer allowing reseed in less than 4 weeks per their instructions. Hose end or pump sprayer.

HKCooper44 · Jul 29, 2024

Round Up makes a weed killer that says on the label, "Kills Weeds, Won't Harm Lawns". Seems to work great. They have a spray wand that takes AA batteries and it sure beats the "pump up" type. Just store it all someplace dry so the batts won't corrode over time, or remove the batts over the winter. If the spray nozzle ever clogs, soak it in a cup of water you just boiled, then put the pick up tube in the water and spray for about 30 seconds. Works every time.

tkhoffman · Jul 30, 2024

I got this cheapo one. After about 6 years an O ring dried up. Went to NAPA, went through their o ring box, and for a few pennies, i am up and running. I put roundup through it, insect killer, soap to keep deer off some plants. It keeps chugging away.

Many years ago i had a steel one. Industrial use, we pushed oils through. We sprayed concrete forms. Not sure you wanna reach that deep into your pocket one of those. Lemme try and dig up the brand.
Edited....here it is https://www.amazon.com/Chapin-1949-...117387110-B00002N8O8-&hvexpln=73&gad_source=1

PACub100 · Jul 31, 2024

I'm going to get my last one out and run some hot, soapy water through it and see if I can get it going again...

tkhoffman · Jul 31, 2024

PACub100 said:
I'm going to get my last one out and run some hot, soapy water through it and see if I can get it going again...

Whats the issue? Is the valve clogged or is it clogged at the removeable tip?

-CӞ · Jul 31, 2024

tkhoffman said:
I got this cheapo one. After about 6 years an O ring dried up. Went to NAPA, went through their o ring box, and for a few pennies, i am up and running. I put roundup through it, insect killer, soap to keep deer off some plants. It keeps chugging away.

Many years ago i had a steel one. Industrial use, we pushed oils through. We sprayed concrete forms. Not sure you wanna reach that deep into your pocket one of those. Lemme try and dig up the brand.
Edited....here it is https://www.amazon.com/Chapin-1949-...117387110-B00002N8O8-&hvexpln=73&gad_source=1

speaking of o-ring replacement in a pump-style lawn/garden sprayer, i seem to recall doing the same with mine - and i gave the o-ring a bit of plumber’s grease or silicone grease as i reassembled the thing.
so much stuff will keep on truckin’ with a little TLC to clean up, de-grit/grime, and refurbishment back to a new-ish state.
GOOD LUCK ‘gainst them WEEDS!

jack casey · Jul 31, 2024

tkhoffman said:
I got this cheapo one. After about 6 years an O ring dried up. Went to NAPA, went through their o ring box, and for a few pennies, i am up and running. I put roundup through it, insect killer, soap to keep deer off some plants. It keeps chugging away.

Many years ago i had a steel one. Industrial use, we pushed oils through. We sprayed concrete forms. Not sure you wanna reach that deep into your pocket one of those. Lemme try and dig up the brand.
Edited....here it is https://www.amazon.com/Chapin-1949-...117387110-B00002N8O8-&hvexpln=73&gad_source=1

Tony, I use Bobbex, especially on hasta which the deer love. Bobbex absorbs in the leaves and good for 3-4 weeks, no longer. Does soap absorb??
Cheers, Jack

tkhoffman · Jul 31, 2024

jack casey said:
Tony, I use Bobbex, especially on hasta which the deer love. Bobbex absorbs in the leaves and good for 3-4 weeks, no longer. Does soap absorb??
Cheers, Jack

I doubt it absorbs in. The smell, more than the taste deters the deer. The damned rabbits, the still eat anything.

PACub100 · Aug 1, 2024

tkhoffman said:
Whats the issue? Is the valve clogged or is it clogged at the removeable tip?

Some of them won't pump pressure, the last one I got spit and sputtered everywhere, leaked around the pump handle and didn't spray well at all.
I'd imagine I just need to clean it which I'll do. Just never remembered my dad ever cleaning ours growing up and we'd just mix spray, pump and go...

-CӞ · Aug 1, 2024

the quality of rubber (o-ring/seal) today sure isn’t as good as it was years ago.
nothing modern with rubber parts lasts as long as its predecessor did!
(o-rings, inner tubes, mower tires, drive wheels, even rubber bands)

Everettlee · Aug 2, 2024

-CӞ said:
the quality of rubber (o-ring/seal) today sure isn’t as good as it was years ago.
nothing modern with rubber parts lasts as long as its predecessor did!
(o-rings, inner tubes, mower tires, drive wheels, even rubber bands)

It is easy to find lesser quality, for my job quite often. I am replacing O-rings in hydraulic systems and find it necessary to use Viton orings. They are good quality for hydraulics

-CӞ · Aug 2, 2024

Everettlee said:
It is easy to find lesser quality, for my job quite often. I am replacing O-rings in hydraulic systems and find it necessary to use Viton orings. They are good quality for hydraulics

thanks for the tip!

mgonitzke · Aug 2, 2024

What you are perceiving as "low quality" in seals, o-rings, etc. is more likely the wrong material for the wrong application. There are quite a few different O-ring materials, not all of which are compatible with all fluids, and if you are just buying them from a bin at a hardware store you may not know what you are getting.

Tires you get what you pay for. There are quality ones but you have to pay. I will agree on tubes though- unfortunately no one seems to make good tubes anymore.

tkhoffman · Aug 2, 2024

mgonitzke said:
What you are perceiving as "low quality" in seals, o-rings, etc. is more likely the wrong material for the wrong application. There are quite a few different O-ring materials, not all of which are compatible with all fluids, and if you are just buying them from a bin at a hardware store you may not know what you are getting.

Tires you get what you pay for. There are quality ones but you have to pay. I will agree on tubes though- unfortunately no one seems to make good tubes anymore.

Yup, in the last bunch of years, i would cheap out on buying tires and just put tubes in tires like walk behind brush hogs, hand trucks, wheel barrows. They dont last two years without slow leakdown. Those small diameter rims are a b****tch to work with.

This community needs YOUR help today!

Why Join?

Sprayers and weed control

Help Support IH Cub Cadet Forum:

PACub100

Well-known member

Everettlee

Well-known member

kzintner

Well-known member

HKCooper44

Well-known member

Attachments

tkhoffman

Well-known member

Attachments

PACub100

Well-known member

tkhoffman

Well-known member

-CӞ

Well-known member

jack casey

Well-known member

tkhoffman

Well-known member

PACub100

Well-known member

-CӞ

Well-known member

Everettlee

Well-known member

-CӞ

Well-known member

mgonitzke

Well-known member

tkhoffman

Well-known member

Similar threads

Latest posts

This community needs YOUR help today!

Why Join?

Sprayers and weed control

Help Support IH Cub Cadet Forum:

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!