• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.

    Why Join?

    • Exclusive Access: Gain entry to private forums.
    • Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
    • Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

149 Starter Generator/Charging Woes

IH Cub Cadet Forum

Help Support IH Cub Cadet Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kweimann

Well-known member
Joined
Nov 11, 2001
Messages
210
displayname
Kenny Weimann
Working on a friend's 149 did 12 v test and S/G ramps up then brakes when F terminal is energized. VR hasn't worked in years. Was told the Armature stud on the S/G should be putting out 14 or more volts, it's only putting out 3 volts. Any ideas? VR is not connected, battery new and fully charged. Grounded the field terminal and the ammeter jumps to full charge so I thing the S/G is ok. Thanks
 
Armature is the starter side...shouldn't be output from that with the tractor running. 14V+ from the FIELD terminal would be normal. Everything else you describe indicates the starter/generator is functioning properly. Not sure what the question is here.
 
Armature is the starter side...shouldn't be output from that with the tractor running. 14V+ from the FIELD terminal would be normal. Everything else you describe indicates the starter/generator is functioning properly. Not sure what the question is here.
Why only 3 vdc from the field terminal?
 
Well, I ordered the Correct, albeit Expensive Voltage Regultor off of Ebay and now she is charging just fine. A word to the wise, when I first started it up she spiked at 17 volts. I ran it for a few minutes like that, shut it off, then restarted it a few minutes later and she was at 14.7/14.8 vdc charging. All good now,

Link to the video


Link to Ebay ad for the regulator
https://www.ebay.com/itm/285144797340

Thanks,
Kenny
 
Last edited:
Thanks Kenny,
I'm going through the same thing my self with a 129. I ordered a regulator from the ebay link. Fingers crossed it fixes my problems like it fixed yours.
 
I get 3v or less on the F field too. on my SG well both of my SG I tried.. tho i got 2 brand new VR both over charge i mean the Ammeter is pegged to the right.
 
i just last week found an old new stock starter generator online my issue now is my son replaced it for me and messed up the pulley with a puller so i need a new pulley but every where on line says discontinued or if the place says its in stock and i order it within a few hours they cancel my order saying its discontinued and they cant find another source.
anybody have an old one in decent condition they would be willing to let go of.
part # i got from international is KH-231278-S.
any ideas?
 
i just last week found an old new stock starter generator online my issue now is my son replaced it for me and messed up the pulley with a puller so i need a new pulley but every where on line says discontinued or if the place says its in stock and i order it within a few hours they cancel my order saying its discontinued and they cant find another source.
anybody have an old one in decent condition they would be willing to let go of.
part # i got from international is KH-231278-S.
any ideas?
I got one off eBay a few years back for a good price. CC Specialties carries them as well. Make sure you line up the pulleys when you replace the one on the SG or your belt won’t last very long. BTDT.
 
How could one fail to see this in the banner section up top??

1721854220670.png
 
Thanks for the tip PACub100, The refresh also works on my desktop when viewing the forum for the other sponsors at the top. Diggers site doesn't show up until I refresh, not that I couldn't find CCC Specialties in the past, I've spent over $600 for clutch spare parts in the last 3 months, miss the cow tails he used to include with the order though. This has always been the go-to forum for the answers to keep our cubs running and share with others.
Thanks again,
Dave
 
Thanks for the tip PACub100, The refresh also works on my desktop when viewing the forum for the other sponsors at the top. Diggers site doesn't show up until I refresh, not that I couldn't find CCC Specialties in the past, I've spent over $600 for clutch spare parts in the last 3 months, miss the cow tails he used to include with the order though. This has always been the go-to forum for the answers to keep our cubs running and share with others.
Thanks again,
Dave
Aw yes, the "Cow Tails"
 

Latest posts

Back
Top