-
This community needs YOUR help today!
With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
We need more Supporting Members today.Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.
Why Join?
- Exclusive Access: Gain entry to private forums.
- Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
- Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!
This is your chance to make a difference. Become a Supporting Member today:
Help Support IH Cub Cadet Forum:
Jamocha
- Messages
- 39
- Reaction score
- 6
Latest activity Postings About
-
-
Jamocha replied to the thread Steering Wheel Removal.Okay so upon further investigation, my friend helping Leaning heavy on the cut the wheel off method. I have another wheel I could put... -
Jamocha replied to the thread Steering Wheel Removal.I need to repair or replace the dash piece. Being able to remove it would make doing a proper repair job much easier
-
Jamocha replied to the thread Steering Wheel Removal.The dash needs repaired/replaced and being able to remove that would make it much easier to do a proper job. Also it needs new decals...
-
Jamocha replied to the thread Steering Wheel Removal.Okay, after a week of messing with this thing off and on and a lot of PB Blaster, it will not come off. It appears that the threads on...
-
I have been reading on removing a stuck steering wheel, as mine seems to be permanently seized to the shaft of my 126. I have a bearing...
-
Jamocha replied to the thread Clutch issues.I have been searching for new pressure plates because mine have some warp. I found a shop that would true the for $65/half hour to true...
-
I need to pull the reduction shaft off one cub to replace the junk one in my 126. What is the best way to do this and keep all bearings...
-
Jamocha replied to the thread 941-0362 Bearing replacement.I have access to a couple 73s that have kept indoors but don’t run, I’m planning on taking the input shaft from one of them. If that...
-
In the midst of replacing the input shaft on my 126 I have discovered that the needle bearing is no longer serviceable. Does anyone know...
-
Jamocha replied to the thread Clutch issues.I have access to a cub cadet "graveyard" I may try and salvage a shaft out of one of them.
-
Jamocha replied to the thread Clutch issues.Okay, after taking way too long to assemble the Harbor Freight hydraulic press, I have disassembled the clutch again and have provided...
-
-
Jamocha replied to the thread Clutch issues.This is the order I placed the parts back on to the shaft. As for the old shaft, I will be honest I did not check, but when I pull it...
-
-
Jamocha replied to the thread Clutch issues.In my defense, I didn't realize the release lever was worn beyond use.
-
Jamocha replied to the thread Clutch issues.I replaced all of the coiled pins with new ones because that’s what was in the shaft when I pulled it.
-
Jamocha replied to the thread Clutch issues.I didn’t realize the disc was thick, I purchased it from an individual who does restorations and sells parts online.
-
-
Loading…
-
Loading…
