wanted a mower deck

[mjwhalen]

Looking for a mower deck for my 129 hydro. hoping to find one in wisconsin. believe its a 44 inch 3 blades.

 

[digger]

Looking for a mower deck for my 129 hydro. hoping to find one in wisconsin. believe its a 44 inch 3 blades.

Make your way to northern Minnesota and I'll give ya just to get rid of it. But it will have to be after the snow leaves.

 

[shysel]

MJ, I may have one in SW WI. I believe its a 44c from a quietline series. Not sure if will fit a 129 but i think they similar. If I recall, its in decent shape.

 

[mjwhalen]

Hi not sure what a quietline series is . Hope maybe someone in here could tell us what the difference is. How much would be asking for it ? please stay in touch I am interested. Thank you mike

 

[kmcconaughey]

The "Quiet Line Series" would include the following models: 800, 1000, 1200, 1250, 1450 and 1650. A mower deck from one of these will work on the 129 as the 129 and the Quiet Line series are both "wide frames" and have the same PTO belt width.

 

[rrschmitt]

The 44C Mower decks were actually for the 82 Series as the center drive pulley is set up for a 5/8" wide belt. You can mount the 44C on a 129 but will need to move the LH front hanger hook over to the outer hole to fit your subframe, if you have the mule drive and hunchback subframe, and get a center drive pulley for the narrower drive belt.

A model 44 or 44A deck will fit/work on your 129. You will also need the mule drive that mounts on the front and the hunchback subframe, if you don't have those on your 129 already.

 

[shysel]

MJ, sorry it's a 411u-1111, not a 44C. Not sure what it came off of, perhaps a 186X series.

 

[mjwhalen]

OK thank you we tried : )

 

[dschwandt]

Good place to look for one would be at the big show in Portage, WI in July.
I think it is the 1st weekend after the 4th IIRC
As soon as I get my show guide for this yoear I will post details.
I understand that Cub Cadet will be the feature tractor this year.

We here in the Midwest need to make this a MUST GO TO event this year so they will do it again in future years as this local is really a JD and Case domain!

I will be there with a load of equipment

 

[mjwhalen]

Please keep me updated on the July show. Thanks for the info.

 

[dschwandt]

Will di.
A 44A should not be hard to find, but, one in good usable condition is another story.
I restored one several years back. The bearings and blades are not cheap and the shells are usually pretty beat up and rusted from being left out in the elements.
Where are you located in WI?
I may have one in my shed.

 

[mjwhalen]

Oshkosh

 

[mjwhalen]

Will di.
A 44A should not be hard to find, but, one in good usable condition is another story.
I restored one several years back. The bearings and blades are not cheap and the shells are usually pretty beat up and rusted from being left out in the elements.
Where are you located in WI?
I may have one in my shed.

I live in oshkosh what would u be asking for it ?

 

[eknapp]

i have a 44c but i live in new York by buffalo