Parts Wanted Wanted a Cub 1440 front grill

[Bill Trammell]

Taking snowblower off I removed the side panels and discovered both frame mounts for the grill were totally broken off. So - I thought I would search for replacement and found the price was really stiff. Brings up question of: Does anyone know of anyone that has this particular grill or replacement for reasonable price?

Thank all for any thoughts or suggestions

Bill

 

[jkoenig]

R.F. Houtz, one of our sponsors above is your best bet.

https://cubcadetusedparts.com/

 

[1811Cub]

If finding a used shell doesn't work out, and you have the grille shell with the twin PAR36 large glass bulbs, MTD still sells them for around $200 list. Kinda doubt you will find a good unbroken used for a whole lot less.

• 731-3178 (bare shell)
• 931-3178 (bare shell)
• 759-3773 (kit with bulbs and brackets)
• 959-3773 (kit with bulbs and brackets)

 

[jkoenig]

If finding a used shell doesn't work out, and you have the grille shell with the twin PAR36 large glass bulbs, MTD still sells them for around $200 list. Kinda doubt you will find a good unbroken used for a whole lot less.

• 731-3178 (bare shell)
• 931-3178 (bare shell)
• 759-3773 (kit with bulbs and brackets)
• 959-3773 (kit with bulbs and brackets)

/\. Sounds reasonable. Do they go by SBD yet instead of MTD?

 

[1811Cub]

/\. Sounds reasonable. Do they go by SBD yet instead of MTD?

MTD Products US
Their website is still active.

Going to the Stanleyblackanddecker.com site, absolutely no mention of MTD, or Cub Cadet will be easily found.

 

[Bill Trammell]

One big problem is this: I went to the website and plugged in my Cadet model number and that came up as nothing found. Went to Ser # and same thing. Searching for the cub 1440 proved fruitless also. If I get a chance today I will give them a call.
Have run into this before and for some reason there is very little information on the model that I have - not sure why

 

[bmader]

Bill, I may have a lead for you, message me.

 

[bmader]

Войдите на Facebook Not mine but trying to help.

 

[Bill Trammell]

Is the bottom mounting part in good shape? How about tabs for other mouning (lights) and etc

 

[bmader]

May have to contact the owner with those questions. I had seen this and remembered your post so thought I would share. I do know it will fit though.

 

[Bill Trammell]

Thank you - however they replied that it was sold