Model 125 rod

[ridetjz]

Hi looking for some help with my 125. There is a rod from the forward/reverse lever that goes down to the brake linkage it has a clevis on the end. Anyway that clevis was seized up and the rod snapped. Is there anywhere to buy a new rod with the clevis or is there any fix to repair this? I have to craw under the machine and push the rod up to be able to shift the lever. Any advice would be appreciated. Thanks

 

[dschwandt]

Go here to find your part.

https://cdn.datamanager.arinet.com/image/MTD/0a0e4a2c-e6ee-471e-8fb8-823d04ff34e8/Small
I think, from your description it's #33 in the picture
CCS probably has them

Ref:
32
IH-116383
Clevis, 1/4-28 X 2 Light Adj Rod End Yoke

Unfortunately, the rod itself is NLA

 

[ridetjz]

Thanks for your help but I think it is 31, 32. Would CS have this?

 

[digger]

Thanks for your help but I think it is 31, 32. Would CS have this?

No but Rob will have them.
http://cubcadetusedparts.com/

 

[dschwandt]

I just checked and both are NLA

You may may have to have one made
Should not be too difficult.