• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.

    Why Join?

    • Exclusive Access: Gain entry to private forums.
    • Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
    • Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

Is there a substitute for MTD PTO switch on 782D

IH Cub Cadet Forum

Help Support IH Cub Cadet Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mames

Member
Joined
Jun 20, 2009
Messages
22
displayname
Mark Ames
I was blowing snow tody and I had the PTO switch quit working for a short time. Is there another switch that will work for this? It is on a 782D. I had simular problems on my 1650 and found that John Deere has a switch that would work because they also used the same engine in some of there tractors with the same PTO unit.
 
Mark:

Unfortunately, that PTO Switch is unique, in that it has a "Start" position to it. The Switch is 725-0893 ---> <font color="ff0000">925-0891</font>

Here is a internal diagram of this switch...

183330.jpg
 
Roland, Mark: and also, unfortunately, on the 782D, there is that 925-0894 PTO Relay, found on the left side of the pedestal, which complicates the matter even further.

Roland, you might give him an internal diagram of that also... I suggest that it show which pin of the PTO Switch goes to which pin of the Relay....then to the PTO itself...

Myron B
 
Be sure to make sure it's a bad pto switch. I had the same problem and it was the relay myron mentioned.
 

Latest posts

Back
Top