Dual Hydraulics 1711 - Help needed

[bpientka]

Hello All,

I was able to find a 2 spool hydraulic valve for my 1711 but was having trouble finding the dual levers setup to operate the valve. Does anyone have any good photos of the dual lever setup? I am wondering if I could modify (carefully add a second lever) the single lever set up to make a dual lever.

Any thoughts?

Thanks

 

[jstertz]

Bernie,
Not sure if this is what you are looking for but these are off my CubKub 1772. If you need some more pics or different angles, let me know.

 

[bpientka]

Thanks Joshua,

Was looking for a photo of one off the tractor on a table or something. From the parts diagram it looks like the left lever is attached directly to the shaft The left side moves the right side valve. Right lever rides on the shaft center shaft of the left lever and moves the left valve.

 

[jstertz]

Bernie--You are correct in your assessment of how that operates. I'm sorry but I don't have one that is out and I'm not removing mine for a picture

! So hopefully someone else has one that is out to get you a picture. Unfortunately, the diesel has a lot of stuff in that little area and so it makes it hard to get a good clear picture of that linkage.

 

[dtanner]

Bernie Pientka
I will look at some pictures of my 1512 in the afternoon to see if I have a picture for you. I know I have some with the battery tray removed and pictures of the front and rear ports I installed. I hope they help you. later Don T

 

[bpientka]

Yes that was my take on it. My 1512 has the dual levers but looks pretty involved to pull the levers off the machine. In the end if that is what I have to do I will do it.

Thanks for all the help.

 

[mmasheris]

All the dual hyd levers for the 82 style are the same.The hardest part is getting the levers through the dash with the steering colum in place.The bracket to hold them is the same just 2 levers instead if one.Do you need the levers and the valve? they go for around $250.00

 

[bpientka]

I only need the levers.