Danco Underdrive for Original

[acurtis]

Does anyone have experience in rebuilding a Danco Underdrive? I have the Danco parts diagram and parts list but I need specs for oil seals, etc. The Danco parts numbers don't really help.

 

[Todd]

I'd be curious about this as well.

Is the Dance you refer to the same as the factory *creeper* on the Original?

Todd.

 

[dgeary]

Generally, seals will have a number stamped in the metal. That number can be used for a cross reference. Otherwise, if you know the OD, ID and thickness of the seal, you can use that to determine a replacement. I would measure the OD of the shaft and the ID of the part that the seal is pressed into as well.

 

[hydroharry]

Because of everything involved with rebuilding and time/work required for re-installation in the tractor, I would not recommend using aftermarket items that may just/work/fit. I'd go to this source for the stuff it was built with.
https://www.ccspecialties.org/ptocreepers.html