Coil and ignition points

[Tc Crawford]

Ok got my wiring harness sorted. Ignition now. Is there an upgraded coil and points for my 71 that has a k241 in it. Or is there an option to go with an electronic setup. ? I’ve seen some coil looking coils on some of these. Thanks

 

[sperrine]

Ok got my wiring harness sorted. Ignition now. Is there an upgraded coil and points for my 71 that has a k241 in it. Or is there an option to go with an electronic setup. ? I’ve seen some coil looking coils on some of these. Thanks

Kirk Engines for both.

 

[Tc Crawford]

Thank you

 

[1811Cub]

The points/condenser is easy-just stick with the stuff it was born with. The Kohler parts work well, and if you set the point gap to spec, there is a good probability that the ignition timing will be spot on.

Kohler coils are very expensive, but like most of their parts they are the best available.

 

[Tc Crawford]

Our sponsors have the correct coil? Cost really isn’t an issue, what is to me important is performance I may be staying points and condenser still. Kirk doesn’t have them anymore. Didn’t see any coils on his sight either

 

[1811Cub]

The part numbers are/were KH-41-519-21-S, KH-231281, KH-231281-S

I found several of these NOS OEM Kohler coils on various sites.

 

[PACub100]

Our sponsors have the correct coil? Cost really isn’t an issue, what is to me important is performance I may be staying points and condenser still. Kirk doesn’t have them anymore. Didn’t see any coils on his sight either

I like the Bosche blues - bought 3 of them for my 1450, 1650 and 100...
I also recommend the Transdenser II from Kirk - I got them for mine as well.

If you get one, just be sure you hook it up correctly and double check it before you turn the ignition key, or "poof" (actually "puff" as in "lil cloud of smoke" puff) it'll be gone like a fart in the wind - ask me how I know.

 

[Tc Crawford]

Well I know one thing the Bosch blue sire is cool looking. The transdenser Kirk doesn’t sell anymore. Maybe I can find it somewhere else but old school won’t be bad either

 

[mgwin]

Not knocking other sponsors, but you can get all the quality stuff you need from CCSpecialties. ("Charlie", "Digger", not sure about any other names. )
Not to mention you will get it PDQ!

 

[Tc Crawford]

The part numbers are/were KH-41-519-21-S, KH-231281, KH-231281-S

I found several of these NOS OEM Kohler coils on various sites.

3 diff ent numbers which one would be suitable for my k241. Also. I couldn’t find a point cover at any site. Should I try to contact by phone? Or they only have their wensite

 

[1811Cub]

Any of those numbers are correct for a single cylinder K series Kohler. Those are all of the part numbers over the course of several years.

 

[dschwandt]

How many point covers do you want?

 

[Tc Crawford]

One is all I need. Just the one tractor you have an extra? Be happy to buy it. One more thing off the list.

 

[dschwandt]

Yours for the shipping.
PM me your address
Dave S