-
This community needs YOUR help today!
With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
We need more Supporting Members today.Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.
Why Join?
- Exclusive Access: Gain entry to private forums.
- Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
- Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!
This is your chance to make a difference. Become a Supporting Member today:
Chute rotator Blower lift
- Thread starter lbrault
- Start date
Help Support IH Cub Cadet Forum:
Will try again to post images and instructions.
{image1} {image2}
Rotator key parts:
Ford car window motor (Amazon $29.00)
one side from bottom half of a PVC sink trap
1 1/2" PVC connector (Slips snugly over above piece and glued to plastic face plate)
on/off/on toggle switch (Home Depot $5.00)
Lift motor key parts
GM window motor (Amazon $29.00)
two connectors from sink trap (grind down back side of one connector} Screws up to face plate
1 1/2" PVC pipe to tread connector (Cut down wrench side to 1/16". Goes inside plastic face plate.
on/off/on toggle switch (Home Depot $5.00)
Hope information is sufficient.
{image1} {image2}
Rotator key parts:
Ford car window motor (Amazon $29.00)
one side from bottom half of a PVC sink trap
1 1/2" PVC connector (Slips snugly over above piece and glued to plastic face plate)
on/off/on toggle switch (Home Depot $5.00)
Lift motor key parts
GM window motor (Amazon $29.00)
two connectors from sink trap (grind down back side of one connector} Screws up to face plate
1 1/2" PVC pipe to tread connector (Cut down wrench side to 1/16". Goes inside plastic face plate.
on/off/on toggle switch (Home Depot $5.00)
Hope information is sufficient.
Will try again to post images and instructions.
,
Rotator key parts:
1. Ford car window motor (Amazon $29.00)
2. one side from bottom half of a PVC sink trap
3. 1 1/2" PVC pipe connector (Slips snugly over above part and is glued on other end to plastic face plate. Kept from rotating by the nail)
4. on/off/on toggle switch (Home Depot $5.00)
Lift motor key parts
1. GM window motor (Amazon $29.00)
2. 1 1/2" PVC pipe galvanize tread connector (Cut down wrench side to 1/16". Install inside plastic face plate.
3. two connectors from a PVC sink trap (grind down back side of one connector} Screws up to face plate on above part. Other connector is secured to tractor mount plate.
4. on/off/on toggle switch (Home Depot $5.00)
Inside the housing for both units is a short pipe welded to the rotating gear.
Hope information is sufficient. Also the design for a rotator might be improve by using the idea I used for the lift which eliminated the need for glue at the face plate. Enjoy.
Rotator key parts:
1. Ford car window motor (Amazon $29.00)
2. one side from bottom half of a PVC sink trap
3. 1 1/2" PVC pipe connector (Slips snugly over above part and is glued on other end to plastic face plate. Kept from rotating by the nail)
4. on/off/on toggle switch (Home Depot $5.00)
Lift motor key parts
1. GM window motor (Amazon $29.00)
2. 1 1/2" PVC pipe galvanize tread connector (Cut down wrench side to 1/16". Install inside plastic face plate.
3. two connectors from a PVC sink trap (grind down back side of one connector} Screws up to face plate on above part. Other connector is secured to tractor mount plate.
4. on/off/on toggle switch (Home Depot $5.00)
Inside the housing for both units is a short pipe welded to the rotating gear.
Hope information is sufficient. Also the design for a rotator might be improve by using the idea I used for the lift which eliminated the need for glue at the face plate. Enjoy.
Similar threads
