CH18S. Kohler ?

[cubs4lifeofme]

WITH NO CLUTCH WHAT WOULD THIS COMMAND 18 HP COME OFF ?

 

[mgonitzke]

Who knows. Looks like a cub spec one that someone removed the clutch from and installed a pulley. It has the CC style driveshaft adapter on the flywheel end.

 

[1811Cub]

Kohler Spec number 62599 originally came on a Cub 3184 and 3186 tractors. They had the vacuum PTO originally, hence why that is long gone.

 

[cubs4lifeofme]

If i can get it running is it something that could be used on my 2084 cub with command or 1862 with junk Magnum ?

 

[cubs4lifeofme]

Drive shaft flange bolts up. Off 2 a good start lol.

 

[cubs4lifeofme]

To the 2084 that Is. Gotta find the motor plate. Ugh

 

[mgonitzke]

2084 had a Command...it will bolt right in. 1862 would need driveshaft, muffler, etc from any of the other cyclops tractors that originally had a Command.

 

[cubs4lifeofme]

Bummer the 2084 turned out to be a 2082 that had a magnum.

 

[Les schwandt]

You will need to drill 4 bolt holes larger and tap them on pto end of motor to mount an electric pto as they are not threaded on that motor. The command engine is also shorter in length than the magnum engine. So keep that in mind when figuring a driveshaft.