Cadet 85 Part List

[Nolan Slagle]

I've recently acquired and been repairing a Cadet 85, and have reached a bit of an unfortunate impasse on part information.
I've realized in the service manual, there should be a deck idler spring. However, the Cub Cadet website doesn't show it, and I haven't a clue on what size of spring I would need. Additionally, all parts manuals I have seen have been for the 85 special, which doesn't have this spring. The service manual has been the only one I have found that makes reference to it, but it doesn't have a part # attached.

If anyone has some info, part number, or even a place to get a part manual for the 85 and not the 85 special, I would greatly appreciate it.

 

[digger]

I've recently acquired and been repairing a Cadet 85, and have reached a bit of an unfortunate impasse on part information.
I've realized in the service manual, there should be a deck idler spring. However, the Cub Cadet website doesn't show it, and I haven't a clue on what size of spring I would need. Additionally, all parts manuals I have seen have been for the 85 special, which doesn't have this spring. The service manual has been the only one I have found that makes reference to it, but it doesn't have a part # attached.

If anyone has some info, part number, or even a place to get a part manual for the 85 and not the 85 special, I would greatly appreciate it.

https://www.ccspecialties.org/implementparts_2.html

 

[Nolan Slagle]

Apologies, but you misunderstand.

I have the torsion spring, but there is supposedly an idler tension spring that attached to that pulley as well. Or at least that's what the service manual seems to think.

I have attached a picture from the service manual, and its the "tension spring" that I am having issues with.

 

[digger]

Apologies, but you misunderstand.

I have the torsion spring, but there is supposedly an idler tension spring that attached to that pulley as well. Or at least that's what the service manual seems to think.

I have attached a picture from the service manual, and its the "tension spring" that I am having issues with.
View attachment 154390

You might have the wrong deck on it, LOL

 

[Nolan Slagle]

Huh, that would explain the difficulty then. What gave me pause was the fact that there was a hole for presumably the spring. Hopefully Its the right deck, so I can finish this project. I am down to changing a few belts, possibly new tires, and sharpening the blades.

Any chance you can tell from an image if this is the deck for an 85?

 

[William Bertelli]

According to my TC-120 Parts Catalog, that is the correct deck for a Cadet 85. The spring assy that keeps the Blade Drive Belt 106 990 C1 taunt, is a torsional spring, 548 485 R1, located under the idler arm assy. From your pic of the deck, the idler pulley is against the wrong side of the belt. It needs to be against the front side of the belt, not where it is now. Your spring may be OK, but no tension as it needs to be relocated clockwise about 90 degrees to rub against the front face of the belt. See attached pic from the parts manual.

 

[William Bertelli]

According to my TC-120 Parts Catalog, that is the correct deck for a Cadet 85. The spring assy that keeps the Blade Drive Belt 106 990 C1 taunt, is a torsional spring, 548 485 R1, located under the idler arm assy. From your pic of the deck, the idler pulley is against the wrong side of the belt. It needs to be against the front side of the belt, not where it is now. Your spring may be OK, but no tension as it needs to be relocated clockwise about 90 degrees to rub against the front face of the belt. See attached pic from the parts manual.

BTW - the pic of the deck of your service manual you had posted shows a deck that is NOT either that of an 85 or an 85 Special. Looks like the deck of a 60 or 75, which is a different animal. The 60 deck has a center drive pully (three pulleys total. Your deck as two pulleys. Whole different animal.

 

[Nolan Slagle]

I see now. Thank you for catching that. That would have been an embarrassing miss on my part.

 

[wjanulis]

Does anyone know where I can buy a Carb rebuild kit for a 85 Special?

 

[-CӞ]

try site sponsor https://www.ccspecialties.org (?)

 

[lpalma]

Take the engine model off the engine tin and go to the briggs and stratton parts lookup.

https://powermowersales.com/parts-lookup#

 

[wjanulis]

Take the engine model off the engine tin and go to the briggs and stratton parts lookup.

https://powermowersales.com/parts-lookup#

Thanks, I will try that.

 

[wjanulis]

Take the engine model off the engine tin and go to the briggs and stratton parts lookup.

https://powermowersales.com/parts-lookup#

What # am I referencing? I have several numbers...

 

[mgonitzke]

Search for "Cadet 85 Special" in the Cub Cadet Parts Lookup.

Carb Kit part number is BS-394698.

 

[wjanulis]

I tried that and it keeps giving me an error. I've tried evey combination and it gives me the same message.

Search for "Cadet 85 Special" in the Cub Cadet Parts Lookup.

Carb Kit part number is BS-394698.

 

[lpalma]

Drop the BS- and search with just 394698 the old number is 299852.

.

 

[wjanulis]

Found it! I also ordered a new magneto..hopefully I can have the Cub running soon. Thank you for your help everyone!