bellwood
Well-known member
- Joined
- Jul 29, 2007
- Messages
- 141
- displayname
- Brian Ellwood
Hello all, my first post here.
I had a IHCC 124 passed down to me that used to run rather well.
Now it struggles to start, when it does only runs for a few minutes, then starts to give out and backfires as it stops.
I pressure tested it and on a brand new battery it's all it can do to reach 70 PSI.
My 124 has a 12HP Kohler motor, no lights, push button and three position switch.
Looking for advice... My neighbor who is very familiar with rebuilding tractors says the motor is winded due to the tolerances being shot and that I'd need to have the cylinder worked, sleeved, and a +10 piston installed, likely the shaft turned, etc.
Thank you
I had a IHCC 124 passed down to me that used to run rather well.
Now it struggles to start, when it does only runs for a few minutes, then starts to give out and backfires as it stops.
I pressure tested it and on a brand new battery it's all it can do to reach 70 PSI.
My 124 has a 12HP Kohler motor, no lights, push button and three position switch.
Looking for advice... My neighbor who is very familiar with rebuilding tractors says the motor is winded due to the tolerances being shot and that I'd need to have the cylinder worked, sleeved, and a +10 piston installed, likely the shaft turned, etc.
Thank you