Archive through May 10, 2017

[awoloch]

For Sale "AS IS" 1964 International Cub Cadet 100 Lawn & Garden Tractor with 38-inch mowing deck. It has been in indoor storage since about 1989. $1,200.

 

[digger]

Anthony W.
So your asking 1200 bucks for something that has no description other than a mowing deck?
How about some details, pictures or just plain information other than it's been setting since 1989.

 

[masmith]

Complete rear lift with hardware for an Original, Y-shaped sleeve hitch and 10" plow. $350. Picked up in Shepherdsville KY 40165

Contact me at 502-741-6628. Voice or text

 

[mshippee]

WORKING! $650 1967 IH Cub Cadet 104 with 38" mower deck with newly sharpened blades and snow thrower attachment. This is a non-hydrostatic narrow-frame tractor with quick-hitch system, bought for $900 in 2012. Works well, recently tuned and carb cleaned, oil changed, muffler replaced. Has its quirks of course! Needs new battery. Selling package for $650 in Northeastern Connecticut 06278, Come and get it, this won't last!

Please email or call/text Melissa at [email protected] or 860-303-6092

 

[nbextermueller]

That's quite the sales pitch Melissa!

 

[mshippee]

Thanks, Nic!

 

[rneubauer]

Due to lack of storage space and daughter’s preference to due her contract mowing with a CCC 1810 tractor I will be selling my IH 1650 tractor I named Gill.

The Good: Gill has a K321 (14hp) engine that is stout and starts and runs fine, original 16hp engine is gone. I rebuilt this engine about 5 years ago, and it is still tight and after mowing three or four times after an oil change the oil is still clean looking. It has the dual hydraulics on it (i.e. front remote ports for angling a snow blade) 44" solid deck with good spindles and smaller speed up pulley is included. Everything works as it should, PTO, lights etc.. I converted this tractor to have wheel studs for the rear wheels, and the front has 1” spindles, also the engine crade mod has been done.
The Bad: all 4 tires have a degree of dry rot and sidewall cracking but they all hold air. The fronts need to be replaced. Hydro unit works fine, but it is sometimes lazy in reverse especially when trying to back up on steep inclines, however Flat ground is fine. All safeties have been disabled by PO. Gill has gotten many different colored parts over the years, from black axles to yellow subframes that make it well a colorful tractor.
The Ugly: PO to the PO hand painted this tractor red. It is some really tough paint. They also thought that cutting holes in the quietline side panels and adding vents was necessary, hence I have nicknamed with tractor "Gill" because it looks like he has a set of fish Gills.

The Price: No haggle price of 400 dollars. The dual hydraulics and solid running quietline engine are worth that to somebody who needs it. Tractor runs and mows to great for me to part it out though. I will offer for sale locally after allowing the forum members first shot at this. email: [email protected] or text/call 330-304-6656

 

[rneubauer]

A side pic of Gill

 

[prtombaugh]

For Sale: A pair of B F Goodrich 6-12 x 23 All Purpose Garden Tractor tires mounted on nice rims. One rim is marked with EWC and the other has the IH part number 376189R91. Made in the USA.. Tires show some sidewall cracking, but overall not bad considering their age. The tread is excellent. I can deliver these to AJ's Garden Tractor Jamboree in Oregon, IL on May 20th or to Red Power Roundup in Des Moines. Pickup is also available in Woodstock, IL. $60 for the pair plus I'll throw in another decent 6-12 rim with a crappy Carlisle tire mounted on it. It has the IH part number on it. Contact me through my profile for pictures and/or more information.

 

[jsmee]

Cub Cadet 60 for sale
$100.00 or best offer

Got a cadet 60 as part of a sale of another lawn tractor.
I neither collect nor restore these tractors.
Plenty of parts and from what I can tell and pretty much all there except for a seat.
Located in Toronto On.
I have photos but keep getting an error message - so email me if you want to see photos

 

[prtombaugh]

FOR SALE: I have an International rear blade for a Cub Cadet. This blade has been sandblasted and five drilled holes in the A-frame have been welded closed. There is some pitting, but overall this blade is pretty nice. The blade has been treated with rust converter and primed. All that is left is some sanding, another coat of primer, more sanding and then painted with your preferred color of IH white. The lift brackets are reproductions made by member, Mike Masheris, and are identical in shape to originals, just made out of heavier material. An IH decal is included. The blade does not have the spring loaded angle adjuster pin, but an included hitch pin works fine. One edge of the reversible cutter bar has seen lots of use, but the other edge appears unused. Attaching bolts are included. IH isn't making any more of these and they're getting harder to find! The blade can be delivered to AJ's Garden Tractor Jamboree in Oregon, IL on May 20 or to the Red Power Roundup in Des Moines on June 15-17. Pickup is also available in Woodstock, IL. $325

 

[mmasheris]

Reproduction #40 scraper box.Made with heavier material and has 3/16'' Stainless steel cut edges.
$500.00 Will have one at AJ's on Sat May 20th .I have 2 for sale if not sold at AJ's will have at Red Power for sale in June.

 

[prtombaugh]

The International rear blade is sold. Thanks to all who inquired.

 

[dware]

Need hour meter that works for a 782d , that has Cub Cadet on it and looked like an odometer .

 

[kpneedham]

Against my better judgement, I am offering my 682 for sale. This tractor has had a frame up restoration done. I invested $5000 and have the receipts to prove it. I have repowered the tractor with an 18hp Briggs and Stratton Vangaurd V-twin engine, rebuilt the hydrostatic transmission with all new gaskets, seals and check valves. I rebuilt the 44C mower deck and fabricated new serviceable spindles from 4140PH tool steel. New pulleys, belts, bearings, seals and blades on this deck. Also put new pulleys on the mule drive. New bearings and seals on the steering gear box. New paint and decals. New stainless steel hardware where it was warranted. New tires on the front, and the rears are fairly good. New bearing in the magnetic clutch on the PTO. Comes with an extra set of belts and an extra hydrostatic oil filter. Ready to work! Will sacrifice for $3000 or best offer. Serious inquiries only please. I have lots more photos of the restoration project that I can share with an interested party.

 

[rbeem]

1st Post and shoots for the moon...SMH

 

[digger]

Yea, but it sure is purty!!!!

 

[kshultz]

Maybe the Polaris goes with it?

 

[hydroharry]

I happen to think the price is pretty fair, assuming it's done as good as it sounds and looks. Just compare it to what you get for $3k today and it's not even close. It's more comparable to a $6-7k tractor or maybe even more.

 

[sblunier]

Harry, true.....if it was a SGT diesel with a 3 point and 60" Haban.

No offense to the seller, but it's a $1500 tractor ......allowing for the work. These things are like old houses, you don't get out of them what you put into them, you get out of them what they are worth on the market.....