I have decided to sell my hawkbuilt ground saw mounted on a cub cadet this is a very rare piece that would finish anyones collection it is in very good original working condition i have had a new chain made and it has never been in the ground everything works as it should and is complete in everyway, always kept inside may consider partial trades located in ohio $3600.00 or an offer phone calls only please 740-687-1067
-
This community needs YOUR help today!
With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
We need more Supporting Members today.Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.
Why Join?
- Exclusive Access: Gain entry to private forums.
- Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
- Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!
This is your chance to make a difference. Become a Supporting Member today:
Archive through December 14, 2014
- Thread starter cwestfall
- Start date
Help Support IH Cub Cadet Forum:
jstertz
Well-known member
- Joined
- Feb 27, 2009
- Messages
- 808
- displayname
- joshua donald stertz
Parts from an 1862:
Hydraulic lift cylinder with brackets and lines $100 + shipping
Complete rear end without hydro dual disc external brakes $150 pickup only
Frame including rockshaft, brake pedal, etc $25 local pickup only
if there is anything else you need off of an 1862, contact me, I may have it???
Email is in my profile
Hydraulic lift cylinder with brackets and lines $100 + shipping
Complete rear end without hydro dual disc external brakes $150 pickup only
Frame including rockshaft, brake pedal, etc $25 local pickup only
if there is anything else you need off of an 1862, contact me, I may have it???
Email is in my profile
Brinly 12 inch 3 point moldboard plow.
The plow share/point was recently replaced.
It does have some pitting on it.
The white paint was brushed on by a previous owner.
Coulter turns freely. Plow comes with land wheel.
Price:
$250 plus shipping cost if you wanted the plow shipped.
$200 if you pick it up at my house. I can meet you somewhere for $200 and gas money.
Email info is in my profile
Thanks
__________________
The plow share/point was recently replaced.
It does have some pitting on it.
The white paint was brushed on by a previous owner.
Coulter turns freely. Plow comes with land wheel.
Price:
$250 plus shipping cost if you wanted the plow shipped.
$200 if you pick it up at my house. I can meet you somewhere for $200 and gas money.
Email info is in my profile
Thanks
__________________
Plow is sold pending payment.
Selling a bunch of parts, just parted a 127 rolling chassis and have some leftover stuff here also. All parts are located near Springville IA. Please email me if you are interested, pictures are ready, just send an email address and I can send them to you. Prices DO include shipping in the listed price. If you don't like a price, email me, we can talk about it. If there is something you want, but don't see it listed, please email me and I will try to help you as best I can. Thanks!
-Battery hold down with good bolts, $18
-Hydro speed control arm, great shape, no damage to splines but no set screw. $38
-K series air cleaner, came off replacement engine. $25
-Lift arm for 1x2/3 or older, good push button. Comes with ratchet and bolts/nuts, no wire bail for float. $40
-127 dash, will also fit 107, 147, or gear drives with different tin. VERY nice fiberglass, no cracks I can see (one small nick on right side in pic). Tin is in nice shape minus paint fade. Both would be considered resto quality. $50 for dash alone, $25 for tin, or $70 shipped for both.
-127 fenders. Right rear is dinged up some, as well as the right side footrest. One broken reflector on right side, and the "toolbox" has a couple cracks around the mounting holes. $25 PICKED UP.
-Very nice steering wheel and cap. $40
-Rubber foot pedal cover, has some cracks but useable. $10
-Dash cover. $10
-Metal dash with hydro controls. $35
-PTO engagement lever, $20
-82 series front spindles. Convert your wide frame over to heavier 1 inch spindles. $45
-71-123 grille, no screen. Great shape. $30
-Quietline grille. Great shape, $35
-Narrow frame rear end covers, hydro or gear drive. $8
-82 series hood latch bracket. $20
-70/100 foot rests. Straight but have extra larger holes. $20
-1x8/9 belly cover. Great shape. $25
-late 82 series brake calipers. Great shape. Aluminum brackets. $35
-70/100 seat bracket (bolts to frame, holds 3pt top link). $30
-(1) 6x12 rim with IH part number. $25 plus shipping
-(1) Cub Original front rim, $25 plus shipping.
-Battery hold down with good bolts, $18
-Hydro speed control arm, great shape, no damage to splines but no set screw. $38
-K series air cleaner, came off replacement engine. $25
-Lift arm for 1x2/3 or older, good push button. Comes with ratchet and bolts/nuts, no wire bail for float. $40
-127 dash, will also fit 107, 147, or gear drives with different tin. VERY nice fiberglass, no cracks I can see (one small nick on right side in pic). Tin is in nice shape minus paint fade. Both would be considered resto quality. $50 for dash alone, $25 for tin, or $70 shipped for both.
-127 fenders. Right rear is dinged up some, as well as the right side footrest. One broken reflector on right side, and the "toolbox" has a couple cracks around the mounting holes. $25 PICKED UP.
-Very nice steering wheel and cap. $40
-Rubber foot pedal cover, has some cracks but useable. $10
-Dash cover. $10
-Metal dash with hydro controls. $35
-PTO engagement lever, $20
-82 series front spindles. Convert your wide frame over to heavier 1 inch spindles. $45
-71-123 grille, no screen. Great shape. $30
-Quietline grille. Great shape, $35
-Narrow frame rear end covers, hydro or gear drive. $8
-82 series hood latch bracket. $20
-70/100 foot rests. Straight but have extra larger holes. $20
-1x8/9 belly cover. Great shape. $25
-late 82 series brake calipers. Great shape. Aluminum brackets. $35
-70/100 seat bracket (bolts to frame, holds 3pt top link). $30
-(1) 6x12 rim with IH part number. $25 plus shipping
-(1) Cub Original front rim, $25 plus shipping.
I have lost interest in the "148 Hot Rod" tractor.
Pictures show it to look "orange" for some reason, but is indeed red.
Nice running 14Hp AQS from 1450 w/new carb rebuild.
6" Stretched frame.
25% Overdrive Transmission.
New clutch disc and drive shaft.
Polished Diamond plate Aluminum foot plates, side covers and rear "taillight" block outs.
Re-worked dash cover.
Spanking new rear 26" ATV tires and front 5.70 - 8's on Mike Masheris Alumium Oxide Powder coated rims.
Chrome process done to the front grill and air cleaner cover. Jeggs Chrome coil cover.
Custom made extended tunnel cover.
$600.00
Pictures show it to look "orange" for some reason, but is indeed red.
Nice running 14Hp AQS from 1450 w/new carb rebuild.
6" Stretched frame.
25% Overdrive Transmission.
New clutch disc and drive shaft.
Polished Diamond plate Aluminum foot plates, side covers and rear "taillight" block outs.
Re-worked dash cover.
Spanking new rear 26" ATV tires and front 5.70 - 8's on Mike Masheris Alumium Oxide Powder coated rims.
Chrome process done to the front grill and air cleaner cover. Jeggs Chrome coil cover.
Custom made extended tunnel cover.
$600.00
1963 Cub Cadet Original with M&W 9 speed for sale. Purchased new by my uncle. He painted it corvette blue about 30 years ago and I have had it stored for the last 20 years or so. Original motor with electric start, original tires (signs of dry rot but hold air) and hood emblem. Second gear is busted but M&W reduction box works fine. Needs battery. Very few of these out there as you know! Asking $2250.
