• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.

    Why Join?

    • Exclusive Access: Gain entry to private forums.
    • Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
    • Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

Archive through April 02, 2011

IH Cub Cadet Forum

Help Support IH Cub Cadet Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

raweaver

Member
Joined
Apr 29, 2008
Messages
5
displayname
Richard Weaver
Cub Blades. The white one is off a 1000; the yellow one is off a 1650. Decent shape but not perfect. Your choice $90.00. Located in Damascus MD
223373.jpg
 
1772 Cub Cadet for sale. Includes 450 snowblower, 2 1A tillers with gearbox and drive, 46" mower deck. Tractor has new ag tires and front wheels are upgraded to bolt on rims. Engine has 374 hours on 2nd engine. Everything works very well. Drive shaft updated to 1864 style, full size battery. $3200 for everything. Elizabeth Colorado. Call 303 886 5866. Lots of pictures available.
 
I have for sale some Cub cadet items
A rear lift set up for a wide frame $75.00 + shipping
A brinly type spring assist (the one that clamps on to the lift bar) $40.00
Hydro tranny off of a 1650 it has manual check valves and ported pump for hydraulic lift $50.00 pick up only due to the weight.
Frame off of a 1650 $20.00 pick up only
Front axle off of 1650 $20.00
E-mail is in my profile or call (812)486-5305.
 
I have for sale a Cub Cadet 126 less than 5,000 of these were made.
The tractor starts and runs. It smokes some on start up. The rear end sounds good. The carb and govoner need some adjustment I think. Asking $300. OBO just hated to see this tractor be stripped down and parted out. give me a call 309-573-3215
223434.jpg

223435.jpg

223436.jpg
 
70-100 headlights and switch[ will need new bulbs] studs not broke-75.00, 70 -100 grill decent shape 25.00 plus shipping.[ohio]
223486.jpg

223487.jpg

223488.jpg
 
82 series bagger. with or with out deck. Deck was modifide from the dealer for the bagger. Deck is in ok shape, bagger in great shape. Bagger is belt driven and works great. $250.00 picked up here in Clark PA. contact me through the site or at [email protected]
223525.jpg

223526.jpg

223527.jpg
 
For sale cub cadet 149, not sure what year it is cause I am unable to read the full serial number. It has a rebuilt motor, runs good, just needs some carb work on it. I am asking $300 obo on it. I also have a front blade that fits a wide frame, it is a little rusty but everything works fine on it, asking $75 obo. I also have a a 48" mower deck with mule drive and undercarrige asking $75 obo for it and a 44" deck with mule drive and undercarriage for $65 obo. Items are for pick up only in IL, email me for pics thanks.
 
I have a lot of parts that I need to get rid of before they rust.
Excellent QL side panels $60
Sub-frames and mule drives: $50 for complete set-ups and I can ship them.
Mower decks (38" and 42" cast ends, and 38GT deck) $50 each
Parting out 48" deck (rusted but good mechanically)
SGT aluminum rear end without fine-spline axles $20
Standard CI hydro rear end complete minus pump $30
CCO rear end complete with good shifter $50
Still have a few misc 149 parts listed from other post.

[email protected] is best way to communicate and some items must be picked up in Memphis, Indiana for the heavier ones.
 
For sale:


Cub Cadet Original, in pieces but has everything but the motor, all it needs is a motor to be complete- $150

Cub Cadet Original frame, has many good parts- $50

Cub Cadet Original deck, has a few holes that could be patched-$50

For all-$230

Please send me an email if interested. Email is in profile.


Thanks
 
ih-682 dash no cracks-30.00, self releasing valves- 60.00,82 series steering wheel-20.00,nice lp head-150.00 plus shipping
223603.jpg

223604.jpg

223605.jpg

223606.jpg
 
Here's a Rear Lift that fits all the narrow frame Cub Cadets (except Original). This one is off a 127 so it also includes the frame bracket for 106/107/126/127/147 frames (hard to find). You get everything shown in the pic of the rear lift, which I believe is everything you need except for a few more bolts. Also includes that $20 pin used for attaching the Brinley adapter

$135 plus shipping from zip 06798

Also have the IH Spring Assist for rear lift for all the narrow frame tractors (except the Original). You get everything in the pic of the spring assist, which I believe includes all the bolts. $50 plus shipping from zip 06798

Buy both the Rear Lift and the Spring Assist together for $185 and I'll pay the shipping anywhere in the US 48 States.

223611.jpg


223612.jpg
 
Cub cadet 582 for sale. Includes snow plow, 44inch mower deck, wheel weights and chains. Tractor has ag tires(old) and an 18hp briggs and stratton motor. Has a new fuse holder and ignition switch.

THE ENGINE NEEDS A OIL PAN GASKET. NOT A VERY EXPENSIVE PART.

I am asking 800obo. I MAY CONSIDER A TRADE FOR ANOTHER GARDEN TRACTOR.

Located in Berryville, Va. Email is in profile
 
Hi folks, I have a few parts for sale, I don't know the technical names for them but here gos, The 1st is the 90 degree pulley drive for a roto tiller. It has the bottom cast iron pulley included I also have the front quick release pulley setup for attachments OTHER than the mower deck. These came off a 1975 1450 Cub Cadet. I tried to attach some pics, but it won't accept them. I would like $200. for the roto drive pulley and 60 for the other, OBO Thanks. Call 919-604-6033
 
Kohler #30 carburetor, all the parts are there but needs a rebuild kit. It has been soaked in cleaner and blown out. Does have tiny pinhole in bowl. $50 OBO plus shipping. email for questions. [email protected]

223627.jpg


223628.jpg


223629.jpg
 
Engine for parts/rebuild. I have a Kohler K301AS?
It is pretty much complete engine minus a carb and muffler etc. It did seem to have compression with thumb over spark plug hole. I have not seen it run so do not know the history of it. I removed the head and it does not seem to have been touched or bored. It has no stamp on piston. Everthing works normal when I rotate the crank. This item is for someone who wants parts or to rebuild. I can get some pics tonite. As far as shipping goes that will be the buyers responsibility but I am willing to work with you within reason. ie tear apart and ship what you want, that will be worked out if you contact me. $40 dollars OBO. [email protected]
 
As you can see it is spring cleaning in the garage. I have a mower deck from 125 all parts are there. Shell is solid with surface rust of course. I want $30 and you come take it.I am taking this thing to scrapyard real soon and hate to see parts go to waste. pulleys, covers, wheels etc. I will within reason if you contact me ship you the "shippable" parts. you pay the shipping. [email protected]
 
223723.jpg


here is a frame from 125 that is in the same boat as the deck i mentioned earlier. I cannot get that pic to load. contact me for details
Tim P. at [email protected]
 
Price drop on the Original, Original frame, and deck: $200 for everything.

Can send pictures.
 
More toys up for sale.Very nice 582 new 26x12x12 Charlile True powers on back,Firestone tri ribs on front.Has .030 over 16hp Kohler with 18 hp cam and special dual plug ignition.Has David Kirk point saver also.Set up for plowing has sleve hitch on.Also would be good start for nice puller $800.00 or reasonable offer.Located west of Chicago in South Elgin,Il.60177.
223743.jpg

223744.jpg

223745.jpg

223746.jpg

223747.jpg

223748.jpg
 

Latest posts

Back
Top