It seems (and I am not sure why or what changed becaused everything was working fine) that my lift lever is now hitting the upper edge of the opening in the dash not allowing the linkage enough travel to push the valve in to move the cylinder. I tried to move the valve up on the steering column but it really did not move too much. It seemed to be limited by the solid lines going down to the steering box not sure if they should move up or not. I diconnected the linkage and pushed the valve in to see if lift would move to rule out other problems and it moved fine. The only thing I discovered was the nuts that hold the lever bracket to the side of the tractor were not real tight so I tried to realign to get more travel but was unable to do so. I need help plow day is coming up.
-
This community needs YOUR help today!
With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
We need more Supporting Members today.Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.
Why Join?
- Exclusive Access: Gain entry to private forums.
- Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
- Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!
This is your chance to make a difference. Become a Supporting Member today:
1772 lift problem
- Thread starter cvenezia
- Start date
Help Support IH Cub Cadet Forum:
Similar threads
