My name is David. I live in Colorado Springs and am new to the group. I have a CC 1450 that I have had since it was about 5 years old but have let a friend use it sparingly and store it for the last 20 years. It is in pretty nice condition but still needs some TLC. Eager to learn all I can from those of you who are "Cadet veterans." Debating about doing a full restoration or just continuing to do some additional "clean up" on it. Being in Colorado, I need a snow blade and a replacement seat for it but not sure the best places to look so any suggestions are very welcome. The seat doesn't seem to be as challenging as the snow plow. I have a 50" mower deck and an IH gearbox and a 40" tiller for it but have not been able to find the model number to locate a user manual for the tiller. Also debating about replacing the motor mounts just because of the age. Look forward to seeing the projects and builds you all may be doing and learning as much as I can from you all.
-
This community needs YOUR help today!
With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
We need more Supporting Members today.Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.
Why Join?
- Exclusive Access: Gain entry to private forums.
- Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
- Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!
This is your chance to make a difference. Become a Supporting Member today:
A Colorado Howdy!
- Thread starter David Kliewer
- Start date
Help Support IH Cub Cadet Forum:
Hello David. We are glad to have you with us. Tractor looks nice, just keep it clean and enjoy.
Welcome to the forum Dave,tractor looks good!
jkoenig
In Remembrance 2023
- Joined
- Sep 14, 2002
- Messages
- 1,319
- displayname
- Jim Koenig Halfway between Harvester, MO and Cadet, MO
Welcome David! Nice tractor. If you click on the forums tab above, then scroll down to the IH Cub Cadet Tractor Forum, you will find a link to many manuals, plus tons of other good info.
or here’s a link, but teach a man to fish vs give him a fish...
https://www.ihcubcadet.com/forums/ih-cub-cadet-tractor-forum.4/
or here’s a link, but teach a man to fish vs give him a fish...
https://www.ihcubcadet.com/forums/ih-cub-cadet-tractor-forum.4/
mgwin
Well-known member
Welcome!!!
Looks too nice to repaint it. Just take the seat to a local auto upholstery shop and get them to recover it!
Looks too nice to repaint it. Just take the seat to a local auto upholstery shop and get them to recover it!
David , I have 7.... 6 of them don't near as good as yours.I agree with Marty just clean and polish...
- Joined
- Jul 24, 2022
- Messages
- 1,173
- Location
- the High Plains of Kansas
- displayname
- Chris “CӞ” Claussen
David, welcome aboard.
Will you blade snow on pavement or gravel?
Enjoy that beautiful front-range sunshine you receive every day it ain’t snowin’.
Will you blade snow on pavement or gravel?
Enjoy that beautiful front-range sunshine you receive every day it ain’t snowin’.
Bobby Russell
Member
Welcome from another 1450 owner, it's like we're brothers from separate mothers now 
Yes, if you're going to continue using it, just keep it as you have it. Looks good to me
And yes, along with the mounts, I feel like there are a few "must haves" from David Kirk.
1). Muffler crutch
2). Super steer components
3). Transdenser and Bosch blue coil (these you can look at for later but if you're gonna order, might as well get everything at once)
Yes, if you're going to continue using it, just keep it as you have it. Looks good to me
And yes, along with the mounts, I feel like there are a few "must haves" from David Kirk.
1). Muffler crutch
2). Super steer components
3). Transdenser and Bosch blue coil (these you can look at for later but if you're gonna order, might as well get everything at once)
Great suggestions! Thanks for the input. I already looked at what David Kirk offers and have a "list" of what I would like to get from him. The three you mentioned are all on my list. In the past, I have built engines and race cars (and more recently offroad vehicles) and really enjoy making them run well and look nice too. haven't done too much with single-cylinder engines though. Thanks again for reaching out.Welcome from another 1450 owner, it's like we're brothers from separate mothers now
Yes, if you're going to continue using it, just keep it as you have it. Looks good to me
And yes, along with the mounts, I feel like there are a few "must haves" from David Kirk.
1). Muffler crutch
2). Super steer components
3). Transdenser and Bosch blue coil (these you can look at for later but if you're gonna order, might as well get everything at once)
Great pictures. Thanks for sharing them. I have not looked at the condition mine are in but knowing that they are 40+ years old and supporting a single-cylinder engine, it just makes sense that they should be replaced. No local IH or Cub dealers so I just ordered them online from Cub Cadet Parts. Thanks for your input and your assistance. Appreciate the encouragement.
Thanks! Primarily on hard surfaces (concrete or asphalt) but from time to time, I do my son's hard-packed dirt (Chirt) driveway. As an experiment on the blade I have another small tractor, I have replaced the blade "scrape bar" with an HDPE Polyurathane bar and it has worked great. Lighter weight and just as strong as the steel bar.David, welcome aboard.
Will you blade snow on pavement or gravel?
Enjoy that beautiful front-range sunshine you receive every day it ain’t snowin’.
Yes, I'm a Colorado native and I am thankful to live in a place with such beautiful mountain scenery and blue skies most of the time.
Thanks! I'm eager to learn all that I can from you all.
David, WELCOME!
Thanks!
I haven't been on this forum for quite a while but just came up with a question. I bumped into a Cub Cadet snow blower in nice condition for a pretty good price ($50 or less). It has no rust & the paint condition makes it look like it has not been used very much. It is a Model 190-341-100, SN 1H067G20035, which I believe is for a 2009 and newer Cub Cadet Tractor. Is there any way to make this work with my 1450 or would it be more work than it is worth?
mgonitzke
Well-known member
I mean, anything is possible if you have the skills and tools to adapt it, but it's likely more trouble than it is worth.
- Joined
- Jul 24, 2022
- Messages
- 1,173
- Location
- the High Plains of Kansas
- displayname
- Chris “CӞ” Claussen
buy it to flip it? might make a few bucks.
