cubs4lifeofme
Well-known member
Will not turn over. solenoid just clicks. i replaced the starter... Up untill now its been a great tractor .
-
This community needs YOUR help today!
With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
We need more Supporting Members today.Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.
Why Join?
- Exclusive Access: Gain entry to private forums.
- Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
- Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!
This is your chance to make a difference. Become a Supporting Member today:
1812 just clicks
- Thread starter cubs4lifeofme
- Start date
Help Support IH Cub Cadet Forum:
Cub,not enough info to analyze.What have u tried?There are several possibilities.
cubs4lifeofme
Well-known member
Battery is good and when i turn the key to start it the solenoid in front of the battery under the seat just clicks. Tried jumping the solenoid but it just sparks . the pto clicks on and off so thats not the problem.
cub, you can prove the starter by jumping from pos on batt to starter post.starter should kick in.If starter works it's probably loose connections to or from solenoid.You can jump sol.connections also and it will spark when you do..batt input to sol.to output to starter.again it is likely corroded connections or loose ones. check activating sol. wire to be sure you're getting 12v,this wire comes from switch....just because it clicks doesn't mean it's working inside,they do wear out..feed back
tkhoffman
Well-known member
Sounds like a dirty connection at the 'Big wires'...battery to solenoid and solenoid to starter.
When you hear the relay click, are you getting 12v on both large wires on the solenoid. If you arent, the solenoid is bad, if you are then its still possible you have dirty or bad wires to Starter. In this case. The wires cannot handle the current even though you have voltage.
When you hear the relay click, are you getting 12v on both large wires on the solenoid. If you arent, the solenoid is bad, if you are then its still possible you have dirty or bad wires to Starter. In this case. The wires cannot handle the current even though you have voltage.
The best-running Cubs will vibrate some so every elec connection needs to be TIGHT. Use lock washers.
Cheers, Jack
cubs4lifeofme
Well-known member
Looks like the new starter went. put jumpers to it and nothing. wow
cub, that's too bad but it does happen..that's why we have to test every part..
lpalma
Well-known member
The starter gear may be jammed, Try turn the engine backwards by hand a half a turn and try starting it again. You may get lucky.
